Abstract:PurposeElectrokinetic (EK) soil remediation is significantly affected by the electrode configurations. Therefore, this study was conducted to compare the performance of one-dimensional (1D) and two-dimensional (2D) arrays with respect to the remediation of heavy metal-contaminated soils.Materials and methodsA series of laboratory-scale experiments were carried out using two types of soils: kaolinite soil (KS) artificially spiked with heavy metals (Cd, Cu, Pb, Ni, and Zn) and smelter soil (SS) contaminated with Cu and Pb, obtained near a closed smelting factory. First, stepwise experiments on the KS were conducted to compare the EK performance between the 1D and 2D electrode arrays. More specifically, the effect of the number of anode–cathode pairs was investigated in the experiments on the 1D electrode configuration, and trigonal and hexagonal arrangements were compared in the 2D EK experiments. Additionally, the performance of the trigonal array was evaluated according to changes in the anode positions, to switch the areas of effective and ineffective electric field.Results and discussionThe removal efficiencies of the 1D electrode configuration with four anode–cathode pairs (eight electrodes in total) were 69.1% for Cd, 69.2% for Cu, 74.7% for Ni, 28.3% for Pb, and 71.3% for Zn. The removal efficiencies of the 2D hexagonal electrode array, with a similar number of electrodes (six anodes and one cathode for seven electrodes in total), were 79.8% (Cd), 82.6% (Cu), 83.7% (Ni), 34.3% (Pb), and 81.1% (Zn). The total electric power consumptions for the two types of electrode configurations were investigated to be 15.6 and 22.0 kWh/ton, respectively. Despite the increase in electric power consumption in the 2D electrode configuration, it was more efficient than the 1D configuration due to the increased area of effective (active) electric field and subsequently higher removal efficiency. As a result of changing the positions of anodes in the trigonal 2D arrangement, the removal efficiencies of Cu and Pb were increased to a level similar to that obtained with the hexagonal configuration.ConclusionsThis study demonstrated that a 2D electrode configuration increased the EK removal efficiency of contaminants compared with a 1D array. However, cost-effectiveness should be taken into account when optimizing electrode design. Furthermore, the performance of the trigonal 2D EK process was improved by changing the positions of anodes, as a result of the increase in the removal efficiency and decrease in the electrode cost and energy consumption.

Optimization of Electrode Configuration in Soil Electrokinetic Remediation

Effect of electrode configuration on pH distribution and heavy metal ions migration during soil electrokinetic remediation

Field Test on Electro-Osmosis in a Heavy Metal Contaminated Soil: Electrokinetic Remediation and Reinforcement of the Soil

Electrokinetic remediation of heavy metal-contaminated soils: performance comparison between one- and two-dimensional electrode configurations

Effect of Different Electrode Configurations on the Migration of Copper Ions During the Electrokinetic Remediation Process

The Design of a Remediation Device for Heavy Metal Contaminated Soil Under Digital Economy

Electrokinetic Remediation of Heavy Metal Contaminated Soil Using Permeable Reactive Composite Electrodes

Characteristics of Soil Pore Structure Response to Electric Field Strength and Their Effects on Cr(VI) Removal from a Historically Chromium-Contaminated Soil

Analytical Model and Experiment for Electro-Kinetic Remediation of Contaminated Soil Considering Thermal Diffusion

Remediation of kaolin simulated copper contaminated soil by electrodynamics

Effect of Electrode Positioning on Electrokinetic Remediation of Contaminated Soft Clay with Surface Electrolyte

Remediation of Heavy Metal-Contaminated Soils by Electrokinetic Technology: Mechanisms and Applicability.

[Enhanced Electrokinetic Remediation of Heavy Metals Contaminated Soils by Stainless Steel Electrodes as well as the Phenomenon and Mechanism of Electrode Corrosion and Crystallization]

Effects of Permeable Reactive Composite Electrodes on Hexavalent Chromium in the Electrokinetic Remediation of Contaminated Soil

[Remediation of Chromium (VI) Contaminated Soils Using Permeable Reactive Composite Electrodes Technology].

Effect of Electric Field Intensity on Fe (Ⅲ) Enhanced Electrokinetic Remediation of Zn-contaminated Soil

Study on the Effect of Electrokinetic Methods Combined with and Solidification/stabilization Technique for Remediation of Cu2+-contaminated Soil under Different Voltage Gradients

Response Surface Method Analysis on Electro-Enhanced Technique for Remediation of Cadmium Contaminated Soil

Electrokinetic Remediation of a Cu–Zn Contaminated Red Soil by Controlling the Voltage and Conditioning Catholyte Ph

Effects of electrokinetic operation mode on removal of polycyclic aromatic hydrocarbons (PAHs), and the indigenous fungal community in PAH-contaminated soil.

Enhancement of electrokinetic remediation of lead and copper contaminated soil by combination of multiple modified electrolyte conditioning techniques