Abstract:Finding new adsorbents for the desulfurization of flue gases is a challenging task but is of current interest, as even low SO2 emissions impair the environment and health. Four Zr- and eight Al-MOFs (Zr-Fum, DUT-67(Zr), NU-1000, MOF-808, Al-Fum, MIL-53(Al), NH2-MIL-53(Al), MIL-53(tdc)(Al), CAU-10-H, MIL-96(Al), MIL-100(Al), NH2-MIL-101(Al)) were examined toward their SO2 sorption capability. Pore sizes in the range of about 4-8 Å are optimal for SO2 uptake in the low-pressure range (up to 0.1 bar). Pore widths that are only slightly larger than the kinetic diameter of 4.1 Å of the SO2 molecules allow for multi-side-dispersive interactions, which translate into high affinity at low pressure. Frameworks NH2-MIL-53(Al) and NH2-MIL-101(Al) with an NH2-group at the linker tend to show enhanced SO2 affinity. Moreover, from single-gas adsorption isotherms, ideal adsorbed solution theory (IAST) selectivities toward binary SO2/CO2 gas mixtures were determined with selectivity values between 35 and 53 at a molar fraction of 0.01 SO2 (10.000 ppm) and 1 bar for the frameworks Zr-Fum, MOF-808, NH2-MIL-53(Al), and Al-Fum. Stability tests with exposure to dry SO2 during ≤10 h and humid SO2 during 5 h showed full retention of crystallinity and porosity for Zr-Fum and DUT-67(Zr). However, NU-1000, MOF-808, Al-Fum, MIL-53(tdc), CAU-10-H, and MIL-100(Al) exhibited ≥50-90% retained Brunauer-Emmett-Teller (BET)-surface area and pore volume; while NH2-MIL-100(Al) and MIL-96(Al) demonstrated a major loss of porosity under dry SO2 and MIL-53(Al) and NH2-MIL-53(Al) under humid SO2. SO2 binding sites were revealed by density functional theory (DFT) simulation calculations with adsorption energies of -40 to -50 kJ·mol-1 for Zr-Fum and Al-Fum and even above -50 kJ·mol-1 for NH2-MIL-53(Al), in agreement with the isosteric heat of adsorption near zero coverage (ΔHads0). The predominant, highest binding energy noncovalent binding modes in both Zr-Fum and Al-Fum feature μ-OHδ+···δ-OSO hydrogen bonding interactions. The small pores of Al-Fum allow the interaction of two μ-OH bridges from opposite pore walls with the same SO2 molecule via OHδ+···δ-OSOδ-···δ+HO hydrogen bonds. For NH2-MIL-53(Al), the DFT high-energy binding sites involve NHδ+···δ-OS together with the also present Al-μ-OHδ+···δ-OS hydrogen bonding interactions and C6-πδ-···δ+SO2, Nδ-···δ+SO2 interactions.

Exceptional Adsorption and Binding of Sulfur Dioxide in a Robust Zirconium-Based Metal-Organic Framework.

A Novel Robust Phosphate-Functionalized Metal–organic Framework for Deep Desulfurization at Wide Temperature

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium‐Based Metal–Organic Frameworks

Selective Adsorption of Sulfur Dioxide in a Robust Metal–Organic Framework Material

Pillared-layer Ultramicroporous Material for Highly Selective SO2 Capture from CO2 Mixtures

Adsorption of Sulfur Dioxide in Cu(II)-Carboxylate Framework Materials: the Role of Ligand Functionalization and Open Metal Sites

Deep Desulfurization with Record SO2 Adsorption on the Metal-Organic Frameworks

A Robust Aluminum-Octacarboxylate Framework with scu Topology for Selective Capture of Sulfur Dioxide

High Adsorption Capacity and Selectivity of SO 2 over CO 2 in a Metal–Organic Framework

Reversible coordinative binding and separation of sulfur dioxide in a robust metal–organic framework with open copper sites

A Robust Cage-Based Metal–Organic Framework Showing Ultrahigh SO 2 Uptake for Efficient Removal of Trace SO 2 from SO 2 /CO 2 and SO 2 /CO 2 /N 2 Mixtures

Metal–organic framework with pore contraction and modification by diethylammonium cations for record SO2/CO2 separation

In Situ Single-crystal X-ray Diffraction Studies of Physisorption and Chemisorption of SO 2 within a Metal-Organic Framework and Its Competitive Adsorption with Water

Dense Open Metal Sites in a Microporous Metal−Organic Framework for Deep Desulfurization with Record‐high SO2 Storage Density

Modulator-Directed Counterintuitive Catenation Control for Crafting Highly Porous and Robust Metal-Organic Frameworks with Record High SO2 Uptake Capacity.

Zirconium and Aluminum MOFs for Low-Pressure SO2 Adsorption and Potential Separation: Elucidating the Effect of Small Pores and NH2 Groups

A Series of Cation-Modified Robust Zirconium-Based Metal-Organic Frameworks for Carbon Dioxide Capture

Molecular-Level Insight into CO2 Adsorption on the Zirconium-Based Metal–Organic Framework, UiO-66: A Combined Spectroscopic and Computational Approach

Discovery of anion‐pillared metal–organic frameworks for efficient SO2/CO2 separation via computational screening

A 3D ultramicroporous porous organic frameworks for SO2 and aromatic sulfides capture with high capacity and selectivity

Multiscale Co‐Assembly to Meso‐Macroporous Foamed Single‐Crystal Metal–Organic Frameworks for the Supported Capture of Sulfur Dioxide