Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

A Diamine-Based Integrated Absorption-Mineralization Process for Carbon Capture and Sequestration: Energy Savings, Fast Kinetics, and High Stability

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Single-step integrated CO 2 absorption and mineralization using fly ash coupled mixed amine solution: Mineralization performance and reaction kinetics

Experimental Investigation of Amine Regeneration for Carbon Capture through CO2 Mineralization

Diisobutylamine Mediated CO2 Mineralization and CaCO3 Production from Municipal Solid Waste Incineration Fly Ash As Raw Ingredient and Regeneration Reagent

Electrochemically mediated amine Regeneration-CO 2 mineralization: Mechanism and influencing factors

Insights into the interaction between typical amines and alkaline minerals for improved CO<sub>2</sub> absorption and mineralization

A sustainable temperature-swing process for CO2 capture and mineralization at below 100 °C using a recyclable chelating agent and bottom ash

Integrated CO 2 absorption-mineralization process by the MEA + MDEA system coupled with Ba(OH) 2 : Absorption kinetics and mechanisms

Amine-Assisted Simultaneous CO2 Absorption and Mineral Carbonation: Effect of Different Categories of Amines

Reviving the Absorbent Chemistry of Electrochemically Mediated Amine Regeneration for Improved Point Source Carbon Capture

Target-specific Modification of Diethylenetriamine with Hydroxyalkyls: Efficient Absorbents for CO2 Capture

Chemical absorption of carbon dioxide in non-aqueous systems using the amine 2-amino-2-methyl-1-propanol in dimethyl sulfoxide and N-methyl-2-pyrrolidone

A general Energy-Efficient strategy for optimizing CO 2 Capture: Designing and harnessing the rapid adsorption kinetics of Amine-Impregnated adsorbents

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Amino acid promoted single-step carbon dioxide capture and mineralization integrated with polymer-mediated crystallization of carbonates

An Efficient Method for Carbon Dioxide Sequestration Using Semidry Flue Gas Desulfurization Ash

Target-specific modification of diethylenetriamine with hydroxyalkyls: Efficient absorbents for CO 2 capture

Carbon capture by ammonia with reinforced crystallization

Novel Nonaqueous Liquid–Liquid Biphasic Solvent for Energy-Efficient Carbon Dioxide Capture with Low Corrosivity