Abstract:Rapid and sensitive H2 detection is important because of its low threshold for the formation of explosive mixtures in air (∼4%). Palladium's unique interactions with H2 make it particularly useful in room-temperature H2 sensing, but the formation of water by reaction with O2 at the Pd surface can interfere with sensor response. Here, we report H2 sensors using networks of high aspect ratio and ultrathin reduced graphene oxide (rGO)-coated palladium nanowires (Pd ) with a coating of zeolite imidazole framework (ZIF-8) that serves as a nanofiltration layer. We first produced Pd NWs in high yield by a hydrothermal method, then sonicated them with GO and added a reducing agent to produce Pd Thin Pd NWs promote rapid response and high sensitivity, while rGO prevents the formation of additional conductive channels due to expansion of Pd NWs upon H2 exposure, ensuring monotonic sensor response. The coating of ZIF-8 reduces the transport of molecules like oxygen and nitrogen to the Pd NWs while allowing H2 to reach them and H2O to diffuse away from them. The optimized sensors showed a response (relative change in resistance) to 1% H2 in air of up to 2%, with a response time of 5 s and a lower limit of detection of 20 ppm. Relative to previously reported Pd-based H2 sensors with fast response, the Pd @ZIF-8 nanocomposite-based device provides a low-cost, high-performance sensor solution for fuel-cell vehicles and similar applications that require both rapid and sensitive H2 detection.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01348.FTIR spectra of GO and Pd ; representative EDS spectrum of a bulk Pd nanocomposite material; EDS spectrum of an individual Pd as obtained from STEM imaging; SEM image of a Pd sensor, SEM image of a Pd @ZIF-8 sensor and corresponding elemental mapping of the sensor; XPS spectrum of Pd for (a) Ca 2P, (b) O 1s; Pd NWs (c) C 1s, (d) O 1s; hysteresis curve and the corresponding dynamic H2 sensing curve for Pd NWs; response vs H2 concentration curve of and @ZIF-8 sensors; TEM images, dynamic H2 sensing performance, and EDS spectra of 2 ; comparison of sensor response to repeated exposure to 1% H2; response, response time, and recovery time of Pd NWs, Pd , and Pd @ZIF-8 H2 sensor; the response of @ZIF-8 sensor to 100 ppm of H2, CO, CH4, and CO2; and comparison of dynamic H2 sensor performance of the Pd @ZIF-8 sensor on day 1 and on day 150 (PDF)This article has not yet been cited by other publications.

Nitrogen-rich Core-Shell Structured Particles Consisting of Carbonized Zeolitic Imidazolate Frameworks and Reduced Graphene Oxide for Amperometric Determination of Hydrogen Peroxide

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Cobalt Nanoparticles and Atomic Sites in Nitrogen-Doped Carbon Frameworks for Highly Sensitive Sensing of Hydrogen Peroxide.

Core/shell microcapsules consisting of Fe3O4 microparticles coated with nitrogen-doped mesoporous carbon for voltammetric sensing of hydrogen peroxide

Nonenzymatic Amperometric Sensor for Hydrogen Peroxide Released from Living Cancer Cells Based on Hierarchical NiCo2O4-CoNiO2 Hybrids Embedded in Partially Reduced Graphene Oxide

Improved Electrochemical Hydrogen Peroxide Detection Using a Nickel(II) Phthalimide-Substituted Porphyrazine Combined with Various Carbon Nanomaterials

Preparation of a nanocomposite material consisting of cuprous oxide, polyaniline and reduced graphene oxide, and its application to the electrochemical determination of hydrogen peroxide

Atomic-Thick PtNi Nanowires Assembled on Graphene for High-Sensitivity Extracellular Hydrogen Peroxide Sensors.

A Novel Non-Enzymatic Electrochemical Hydrogen Peroxide Sensor Based on a Metal-Organic Framework/Carbon Nanofiber Composite

ZIF-8-derived N-doped porous carbon coated reduced graphene oxide as ultrasensitive platform and its application for electrochemical sensing

Screen-Printed Soft-Nitrided Carbon Electrodes for Detection of Hydrogen Peroxide

Ag Functionalized Molybdenum Disulfide Hybrid Nanostructures for Selective and Sensitive Amperometric Hydrogen Peroxide Detection

Reduced Graphene Oxide-Wrapped Palladium Nanowires Coated with a Layer of Zeolitic Imidazolate Framework-8 for Hydrogen Sensing

Electrochemically Reduced Graphene Oxide – Noble Metal Nanoparticles Nanohybrids for Sensitive Enzyme-Free Detection of Hydrogen Peroxide

Boron Doped ZIF‐67@Graphene Derived Carbon Electrocatalyst for Highly Efficient Enzyme‐Free Hydrogen Peroxide Biosensor

Bimetallic Au@Pt@Au Core-Shell Nanoparticles On Graphene Oxide Nanosheets For High-Performance H2o2 Bi-Directional Sensing

Co-Cr mixed spinel oxide nanodots anchored on nitrogen-doped carbon nanotubes as catalytic electrode for hydrogen peroxide sensing

A Glassy Carbon Electrode Modified with a Nanocomposite Consisting of Carbon Nanohorns and Poly(2-Aminopyridine) for Non-Enzymatic Amperometric Determination of Hydrogen Peroxide

Three-dimensional Porous Reduced Graphene Oxide Decorated with MoS2 Quantum Dots for Electrochemical Determination of Hydrogen Peroxide

Preparation of Manganese Dioxide Nanozyme as Catalyst for Electrochemical Sensing of Hydrogen Peroxide

Detection of Hydrogen Peroxide at A Palladium Nanoparticle-Bilayer Graphene Hybrid-Modified Electrode