Abstract:Supplementary cementitious materials (SCM) can reduce the total amount of Portland cement clinker in concrete production. Rice husk ashes (RHA) can be converted from an agricultural by-product to a high-performance concrete constituent due to a high amount of reactive silica with pozzolanic properties if they are burnt under controlled conditions. The way and duration of combustion, the cooling process as well as the temperature have an effect on the silica form and thus, the chemical and physical performance of the RHA. Various studies on the best combustion technique have been published to investigate the ideal combustion techniques. Yet, the process mostly took place under laboratory conditions. Investigating the difference between the performance of RHA produced in a rural environment and laboratory conditions is useful for the assessment and future enhancement of RHA production, and its application both as building material, for example in rural areas where it is sourced in large quantities, and as additive for high performance concrete. Thus, the paper presents a comparison between RHA produced under rudimentary conditions in a self-made furnace in the rural Bagamoyo, Tanzania and under controlled laboratory conditions at the Technical University of Munich, Germany, with different combustion methods and temperatures. In a second step, RHA was ground to reach particle size distributions comparable to cement. In a third step, cement pastes were prepared with 10%, 20% and 40% of cement replacement, and compared to the performance of plain and fly ash blended cement pastes. The results show that controlled burning conditions around 650 °C lead to high reactivity of silica and, therefore, to good performance as SCM. However, also the RHA burnt under less controlled conditions in the field provided reasonably good properties, if the process took place with proper burning parameters and adequate grinding. The knowledge can be implemented in the field to improve the final RHA performance as SCM in concrete.

Comparative Study Of Water-Leaching And Acid-Leaching Pretreatment On The Thermal Stability And Reactivity Of Biomass Silica For Viability As A Pozzolanic Additive In Cement

Effect of Rice Husk Ash Surface Modification by Silane Coupling Agents on Damping Capacity of Cement-Based Pastes

Experiment study on the mechanical properties and alkali silica reaction (ASR) of mortar blended rice husk ash (RHA)

Evaluating the effect of active ions on the early performance of soft clay solidified by modified biomass waste-rice husk ash

Analysis of Strength Development and Soil–Water Characteristics of Rice Husk Ash–Lime Stabilized Soft Soil

Kinetic study on the preparation of silica from rice husk under various pretreatments

Influence of pre-treatment processes on the purity and characteristics of silica extracted from rice husk

Preparation of Silica by Alkaline-Heating and Precipitation Method from Corn Straw Ash

Effect of rice husk ash on carbon sequestration, mechanical property and microstructure evolution of cement-based materials with early-age carbonation treatment

The Role and Mechanism of Rice Husk Ash Particle Characteristics in Cement Hydration Process

Eco-friendly rice husk pre-treatment for preparing biogenic silica: Gluconic acid and citric acid comparative study

High Performance Concretes with Highly Reactive Rice Husk Ash and Silica Fume

Study on small strain characteristics and microscopic mechanism of rice husk ash modified lime soil

Demineralization Effects on Physicochemical and Combustion Characteristics of Biomass: Insights into Distributed Kinetics, Flue Gas Evolution, and Slag Formation

Hydrothermal synthesis of sodium silicate from rice husk ash: Effect of synthesis on silicate structure and transport properties of alkali-activated concrete

Effect of Rice Husk Ash on the Properties of Alkali-Activated Slag Pastes: Shrinkage, Hydration and Mechanical Property

Production of amorphous aluminosilicate and vaterite from acid leaching of hydrated cement paste

Effects of the addition of red ceramic, limestone filler and rice husk ash in alkali silica reaction

Hydrothermal alkaline synthesis and release properties of silicon compound fertiliser using high-ash coal slime

Performance of Rice Husk Ash as Supplementary Cementitious Material after Production in the Field and in the Lab

Efficient Activation of Coal Fly Ash for Silica and Alumina Leaches and the Dependence of Pb(II) Removal Capacity on the Crystallization Conditions of Al-MCM-41