Abstract:Fe-Mn based layer oxides cathode materials have attracted widespread attention as a potential candidate for sodium-ion batteries (SIBs) owing to the earth abundance, cost-effectiveness and acceptable specific capacity. However, the irreversible phase transition often brings rapid capacity decay, which seriously hinders the practical application in large-scale energy storage. Herein, we design a nickel-doped Na 0.70 Fe 0.10 Cu 0.20 Ni 0.05 Mn 0.65 O 2 (NFCNM-0.05) cathode material of SIBs with activated anionic redox reaction, and then inhibit the harmful phase transition. The ex-situ X-ray diffraction patterns demonstrate the NFCNM-0.05 always keeps the P2 phase during the sodiation/desodiation process, indicating a high structure stability. The ex-situ X-ray photoelectron spectroscopy implies the redox reactions between O 2− and O − occur in the charging process, which offers extra specific capacity. Thus, the NFCNM-0.05 electrode delivers a high initial discharge capacity of 148 mA h g −1 and remains a prominent cycling stability with an excellent capacity retention of 95.9% after 200 cycles at 1 C. In addition, the electrochemical impedance spectroscopy and galvanostatic intermittent titration technique show the NFCNM-0.05 electrode possesses fast ion diffusion ability, which is beneficial for the enhancement of rate performance. Even at 10 C, the NFCNM-0.05 can offer a reversible discharge capacity of 81 mA h g −1 . DFT calculation demonstrates the doping of appropriate amount of Ni ions is benefit for the enhancement of the electrochemical performance of the layer oxides. This work provides an effective strategy to enhance the electrochemical performance of Fe-Mn based cathode materials of SIBs. Fe-Mn-Cu based oxide, Nickel-ion doping, Reversible phase transition, Cycling stability.

Exposing {010} Active Facets by Multiple-Layer Oriented Stacking Nanosheets for High-Performance Capacitive Sodium-Ion Oxide Cathode

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

A Stable Layered Oxide Cathode Material for High‐Performance Sodium‐Ion Battery

Structural Evolution and Redox Chemistry of Robust Ternary Layered Oxide Cathode for Sodium-Ion Batteries

Achieving Structurally Stable O3-type Layered Oxide Cathodes Through Site-Specific Cation-Anion Co-Substitution for Sodium-Ion Batteries

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

A Li-substituted Hydrostable Layered Oxide Cathode Material with Oriented Stacking Nanoplate Structure for High-Performance Sodium-Ion Battery

Controlling Surface Phase Transition and Chemical Reactivity of O3-Layered Metal Oxide Cathodes for High-Performance Na-Ion Batteries

Realizing long-term cycling stability of O3-type layered oxide cathodes for sodium-ion batteries

Regulating the electrochemical activity of Fe-Mn-Cu-based layer oxides as cathode materials for high-performance Na-ion battery

Depressed P3-O3' phase transitions in O3-type layered cathode for advanced sodium-ion batteries

Heteroatom-Substituted P2-Na2/3Ni1/4Mg1/12Mn2/3O2 Cathode with {010} Exposing Facets Boost Anionic Activity and High-Rate Performance for Na-Ion Batteries

P2/O3 biphasic Fe/Mn-based layered oxide cathode with ultrahigh capacity and great cyclability for sodium ion batteries

Deciphering the Formation Process and Electrochemical Behavior of Novel P2/O3 Biphasic Layered Cathode with Long Cycle Life for Sodium-Ion Batteries

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

A High-Rate, Durable Cathode for Sodium-Ion Batteries: Sb-Doped O3-Type Ni/Mn-Based Layered Oxides.

Inhomogeneous Coordination in High‐entropy O3‐type Cathodes Enables Suppressed Slab Gliding and Durable Sodium Storage

A Novel P2/O3 Composite Cathode Toward Synergistic Electrochemical Optimization for Sodium Ion Batteries

Heteroatom-Substituted P2–Na 2/3 Ni 1/4 Mg 1/12 Mn 2/3 O 2 Cathode with {010} Exposing Facets Boost Anionic Activity and High-Rate Performance for Na-Ion Batteries

Topography Control and Component Design Strategies to Enhance Electrochemical Performance of O3-Type Cathode Materials for Sodium-ion Batteries