Abstract:ZnO based piezoelectric nanogenerators (PENG) hold immense potential for harvesting ambient vibrational mechanical energy into electrical energy, offering sustainable solutions in the field of self-powered sensors, wearable electronics, human–machine interactions etc. In this study, we have developed flexible ZnO-based PENGs by incorporating ZnO microparticles into PDMS matrix, with ZnO concentration ranging from 5 to 25 wt%. Among these, the PENG containing 15 wt% ZnO exhibited the best performance with an open-circuit output voltage/short-circuit current of ~ 42.4 V/2.4 μA. To further enhance the output performance of PENG, p-type NiO was interfaced with ZnO in a bulk hetero-junction geometry. The concentration of NiO was varied from 5 to 20 wt% with respect to ZnO and incorporated into the PDMS matrix to fabricate the PENGs. The PENG containing 10 wt% NiO exhibits the best performance with an open-circuit output voltage/short-circuit current of ~ 65 V/4.1 μA under loading conditions of 30 N and 4 Hz. The PENG exhibiting the best performance demonstrates a maximum instantaneous output power density ~ 37.9 μW/cm 2 across a load resistance of 20 MΩ under loading conditions of 30 N and 4 Hz, with a power density per unit force and Hertz of about ~ 0.32 μW/cm 2 ·N·Hz. The enhanced output performance of the PENG is attributed to the reduction in free electron concentration, which suppresses the internal screening effect of the piezopotential. To assess the practical utility of the optimized PENG, we tested the powering capability by charging various commercial capacitors and used the stored energy to illuminate 10 LEDs and to power a stopwatch displays. This work not only presents a straightforward, cost-effective, and scalable technique for enhancing the output performance of ZnO-based PENGs but also sheds light on its underlying mechanism.

Synthesis of Orthorhombic Perovskite-Type ZnSnO3 Single-Crystal Nanoplates and Their Application in Energy Harvesting

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

Controlled synthesis of luminescent ZnS nanosheets with high piezoelectric performance for designing mechanical energy harvesting device

Transformation of ZnS microspheres to non-centrosymmetric nanoplates for the fabrication of flexible piezoelectric nanogenerators: Electrode surface area modification for boosting the output performance

Vertically Aligned Zno Nanoarray Directly Orientated on Cu Paper by H-Bn Monolayer for Flexible and Transparent Piezoelectric Nanogenerator

Tuning ZnO-based piezoelectric nanogenerator efficiency through n-ZnO/p-NiO bulk interfacing

Hybrid piezoelectric nanogenerator based on PVDF film and vertically aligned ZnO nanorods for energy harvesting applications

Supersonically Sprayed Flexible ZnO/PVDF Composite Films with Enhanced Piezoelectricity for Energy Harvesting and Storage

Synthesis and enhanced piezoelectric response of CVD-grown SnSe layered nanosheets for flexible nanogenerators

High Performance and Direct Current Piezoelectric Nanogenerators Using Lithium‐doped Zinc Oxide Nanosheets

Surface modified hybrid ZnSnO3 nanocubes for enhanced piezoelectric power generation and wireless sensory application

Distributed Energy Harvesting of ZnO Nano-Shells

Review of Zinc Oxide Piezoelectric Nanogenerators: Piezoelectric Properties, Composite Structures and Power Output

Hydrothermally grown pure and Er-doped ZnS nanocrystals based flexible piezoelectric nanogenerator for energy harvesting and sensing applications

Textured CsPbI3 Nanorods Composite Fibers for Stable High Output Piezoelectric Energy Harvester

Enhanced piezoelectric performance of ZnSnO3@PVDF composite films by control of embedded contents of ZnSnO3 nanoparticles

A High Power ZnO Thin Film Piezoelectric Generator

Emerging ferroelectricity and piezoelectric energy harvesting properties in lead-free zinc titanate nanocrystals

A novel duplication in the FMR1 gene: implications for molecular analysis in fragile X syndrome and repeat instability

High-performance Piezoelectric Nanogenerators Based on Cs2Ag0.3Na0.7InCl6 Double Perovskites with High Polarity Induced by Zr/Te Codoping

Flexible piezoelectric energy-harvesting nanogenerator using supersonically sprayed polyvinylidene fluoride and iron oxide nanocubes