Abstract:Developing stable and highly efficient photoactive materials is desirable to their extensive application in photoelectrochemical (PEC) sensors. Herein, a nickel–cobalt layered double hydroxides (NiCo-LDHs) cocatalyst-modified TiO2 nanotube arrays (TiO2NTAs) photoelectrode (NiCo-LDHs/TiO2NTAs/Ti) was fabricated and used to construct a PEC sensing platform for hexavalent chromium, Cr(VI), detection. The resultant NiCo-LDHs/TiO2NTAs/Ti showed higher photocatalytic water-splitting activity than the pristine TiO2NTAs/Ti, and an enhanced anodic photocurrent was realized at a potential of 0 V (vs Ag/AgCl). On the basis of changes of the photocurrent signal induced by the interaction between photogenerated electrons and Cr(VI) as an effective electron scavenger in solution, a PEC sensor for Cr(VI) detection was developed and showed a linearly decreased photocurrent with increasing Cr(VI) concentration between 0.5−20 μM, 20−400 μM, and 400−1800 μM with a 0.12 μM detection limit under the optimized test conditions. The method showed simplicity, excellent selectivity and sensitivity, a wide linearity range, and high stability. The prepared PEC sensor succeeded in the Cr(VI) detection of river water and tap water samples, and it presented good applicability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.2c00521.Materials and apparatuses, preparation of real samples, UV–vis diffuse-reflectance spectra and Tauc plots of TiO2NTAs and NiCo-LDHs/TiO2NTAs, optimization of the deposition time of NiCo-LDHs and the pH of the supporting electrolyte, photocurrent responses of a TiO2NTAs/Ti photoeletrode to Cr(VI) under UV-light irradiation and the derived calibration curves, photocurrent responses of a NiCo-LDHs/TiO2NTAs/Ti photoelectrode to Cr(VI) under visible-light irradiation and the corresponding derived calibration curves, reproducibility and repeatability of the PEC sensor, and a comparison of Cr(VI) the detection performances of different photoelectrodes (PDF)This article has not yet been cited by other publications.

A Cathodic Photoelectrochemical Sensor for Chromium(vi) Based on the Use of PbS Quantum Dot Semiconductors on an ITO Electrode

A Miniaturized Electrochemical System for High Sensitive Determination of Chromium(vi) by Screen-Printed Carbon Electrode with Gold Nanoparticles Modification

Ultrasensitive Photoelectrochemical Determination of Chromium(vi) in Water Samples by Ion-Imprinted/formate Anion-Incorporated Graphitic Carbon Nitride Nanostructured Hybrid.

Ultrasensitive detection of chromium (VI) by a “signal-off” cathodic photoelectrochemical sensor based on AgBr0.8I0.2-Ag-CNTs composite

A Photoelectrochemical Sensor Based on TiO 2 Nanotube Arrays Decorated with Nickel-Cobalt Layered Double Hydroxides for the Effective and Sensitive Detection of Chromium(VI)

Ultrasensitive detection of chromium (VI) by a "signal-off" cathodic photoelectrochemical sensor based on AgBr 0.8 I 0.2 -Ag-CNTs composite

Unbiased and Signal-Weakening Photoelectrochemical Hexavalent Chromium Sensing via a CuO Film Photocathode

Visible light driven photoelectrochemical sensor for chromium(VI) by using BiOI microspheres decorated with metallic bismuth

Sensitive Detection of Cr (VI) Integration of the Ag2s QDs with MnO2 Nanosheets Via the Redox Reaction Induced Photoelectrochemical Variation

Carbon dots derived from Poria cocos polysaccharide as an effective “on-off” fluorescence sensor for chromium (VI) detection

Photo-electrochemical sensor based on MoO 3 /ZnCdS Z-type heterojunction for detecting 4-Nitrophenol and hexavalent chromium

Ag 2 S QDs integration with MnO 2 nanosheets for the sensitive detection of Cr (VI) via the redox reaction induced photoelectrochemical variation

A Subnanomole Level Photoelectrochemical Sensing Platform for Hexavalent Chromium Based on Its Selective Inhibition of Quercetin Oxidation

Coating Fe3O4 Quantum Dots with Glutamic Acid to Achieve Enhanced Catalysis for Facile and Sensitive Detection of Chromium(vi) in Water.

Construction of Effective Nanosensor by Combining Semiconducting Polymer Dots with Diphenylcarbazide for Specific Recognition of Trace Cr (VI) Ion in Water and Vitro

An Ultrasensitive Colorimetric Chromium Chemosensor Based on Dye Color Switching under the Cr(VI)-Stimulated Au NPs Catalytic Activity.

Core-shell spherical cerium oxide, N-doped carbon dots and copper oxide nanocomposites with oxidase-like activity for colorimetric detection of hexavalent chromiums

Reduced Phosphomolybdate As Photo-Assisted Electrochemical Crystalline Sensor for Trace Cr(VI) Detection

Unusual Hexa-Nuclear Cadmium Cluster Functionalized Phosphomolybdate As Effective Photoelectrochemical Sensor for Trace Cr(VI) Detection

Ultrahigh Selective Colorimetric Quantification of Chromium(VI) Ions Based on Gold Amalgam Catalyst Oxidoreductase-like Activity in Water.

Photocatalytically induced Au/mpg-C3N4 nanocomposites for robust electrochemical detection of Cr(VI) in tannery wastewater