Abstract:Polyaniline (PANI), as one of the most promising electrode materials for flexible supercapacitors, facing the problems of limited capacitive properties and poor cycling stability. Herein, we demonstrate that dopants have a great effect on the electrochemical performance of PANI and selecting a suitable dopant can be used as an effective way for enhancing the electrochemical behavior of PANI electrode. All PANI electrodes were synthesized by electropolymerization method using hydrochloric acid (HCl), perchloric acid (HClO4), sulfuric acid (H2SO4), p-toluenesulfonic acid (p-TSA), phosphoric acid (H3PO4) and phytic acid (PA) as dopants, respectively. The influence of dopants on morphology, doping level, redox sites accessibility and electrochemical performance of PANI electrodes were studied systematically. The results show that, PANI/HClO4 has the best capacitive behavior with a maximum specific capacity of 1341 C g−1 at 5 mV s−1 along with a 57 % capacity retention after 2000 cycles. Moreover, PANI/p-TSA shows the best cycling stability with 70% of capacity retention after 2000 cycles accompanied with a relatively high specific capacity (722 C g−1 at 5 mV s−1). Furthermore, PANI/HClO4 and PANI/p-TSA were used as electrodes for the fabrication of flexible all-solid-state symmetric supercapacitors. Results indicate that PANI/HClO4 device has higher energy density (12.57 Wh kg−1 at 283 W kg−1) than that of PANI/p-TSA (8.86 Wh kg−1 at 199 W kg−1). In contrast, PANI/p-TSA device with a capacity retention over 80% after 3000 cycles has better stability than PANI/HClO4 device which maintain 73% capacity after 3000 cycles. This fundamental study provides a much easier route in achieving high performance flexible PANI-based electrodes and opens new opportunities for facilitating PANI-based electrodes as promising candidates for wearable electronics.

In Situ Growth of the Ni3V2O8@PANI Composite Electrode for Flexible and Transparent Symmetric Supercapacitors

Nano Nickel Oxide Coated Graphene/Polyaniline Composite Film with High Electrochemical Performance for Flexible Supercapacitor

Transparent and Flexible Electrodes and Supercapacitors Using Polyaniline/single-Walled Carbon Nanotube Composite Thin Films.

Electrochemical performance of polyaniline-coated γ-MnO2 on carbon cloth as flexible electrode for supercapacitor

Amorphous Nickel Oxide and Crystalline Manganese Oxide Nanocomposite Electrode for Transparent and Flexible Supercapacitor

Facile Synthesis of a Ni-based NiCo2O4-PANI Composite for Ultrahigh Specific Capacitance

Fabrication of PANI@Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Flexible Nanocomposites With Ultrahigh Specific Areal Capacitance And Tunable Properties Based On A Cellulose Derived Nanofiber-Carbon Sheet Framework Coated With Polyaniline

Fabrication of Coral-like Polyaniline/Continuously Reinforced Carbon Nanotube Woven Composite Films for Flexible High-Stability Supercapacitor Electrodes

Flexible and freestanding PANI: PSS/CNF nanopaper electrodes with enhanced electrochemical performance for supercapacitors

Polyaniline combining with ultrathin manganese dioxide nanosheets on carbon nanofibers as effective binder-free supercapacitor electrode

Enhanced Electrochemical Performance of Polyaniline/carbon/titanium Nitride Nanowire Array for Flexible Supercapacitor

NiCo2O4@Polyaniline Nanotubes Heterostructure Anchored on Carbon Textiles with Enhanced Electrochemical Performance for Supercapacitor Application

Synthesis and Electrochemical Performance of Flexible and Freestanding Graphene-Encapsulated PANi@MnO2/ECNFs Nanoscale Architectures for Electrochemical Supercapacitors

Facile and controllable in-situ nitridation of polyaniline electrode for high-performance flexible all-solid-state supercapacitors

High performance solid-state flexible supercapacitor based on Fe3O4/carbon nanotube/polyaniline ternary films

CuS/polyaniline nanoarray electrodes for application in high-performance flexible supercapacitors

Polyaniline-coated electrospun carbon nanofibers with high mass loading and enhanced capacitive performance as freestanding electrodes for flexible solid-state supercapacitors

Electropolymerization of polyaniline as high-performance binder free electrodes for flexible supercapacitor

Facile Preparation of High-Strength Polyaniline/polyvinyl Chloride Composite Film As Flexible Free-Standing Electrode for Supercapacitors