Abstract:Recently, MOF-derived metal oxides have been demonstrated as excellent semiconductor materials. Their derivatives can retain the high porosity and high specific surface area of the parent MOFs, effectively improving the adsorption capacity and mass transfer rate of reactive substances. Herein, UiO-67 was selected as the substrate due to its high hydrothermal stability and high specific surface area. Through the in situ growth of TiO2 nanoparticles, a series of double metal composite catalysts (ZrxTi/C) were produced after calcination at 400 degrees C. The X-ray diffraction (XRD) patterns showed that the UiO-67 crystal structure of collapsed after calcination, forming a Zr-O-C/TiO2 heterojunction. Energy-dispersive spectrometry (EDS) mapping images showed that Ti, Zr, and O were evenly distributed throughout the materials without obvious aggregation. Compared to conventional inorganic semiconductor materials, ZrxTi/C heterojunction catalysts provided much higher BET surface area (317 m(2)g(-1)) for the effective enrichment of contaminants on the catalyst surface. Tetracycline was selected as a representative antibiotic to study photodegradation performance under a 300 W Xenon lamp. Among the obtained catalysts, the Zr0.3Ti/C heterojunction catalyst exhibited the best photocatalytic efficiency, achieving 98% degradation within 30 min in a 10 mg.L-1 tetracycline solution. Fluorescence spectra, electrochemical impedance spectroscopy, and transient photocurrent responses showed that the Zr0.3Ti/C heterojunction catalyst exhibited the fastest charge-hole separation rate and a maximum photocurrent density of 8.75 mu A.cm(-2), which was 2.64 and 3.71 times those of UiO-67 and UiO-67(0.3)/TiO2, respectively. The mechanism of tetracycline photodegradation was determined by UV-visible diffuse-reflectance absorption spectroscopy, Mott-Schottky plots, and electron spin resonance technology. A direct Z-scheme charge separation path was formed by the transfer and recombination of photoexcitede. in the conduction band (CB) of Zr-O-C with h(+) in the valence band (VB) of TiO2, which effectively reduced the combination rate of e. and h(+) in Zr-O-C and TiO2. The photodegradation rate constant of Zr0.3Ti/C was 16 and 3.7 times those of TiO2 and Zr-O-C, respectively, due to its large specific surface area and excellent tetracycline adsorption performance. Furthermore, the Zr-O-C/TiO2 heterostructure exhibiting suitable energy level matching and containing highly conductive carbon material improved the separation and migration of electron-hole pairs. Mechanistic studies revealed that the three types of radicals, superoxide radicals (O-2(center dot-)) ,hydroxyl radicals (center dot OH), and a small amount of holes (h(+)) simultaneously promoted tetracycline photodegradation. After five recycling tests, Zr0.3Ti/C heterojunction catalyst maintained 91.2% removal efficiency for tetracycline, indicating good cycle stability. Combining the synergistic effects of adsorption and photodegradation, using bimetallic heterojunction composites with high specific surface area is promising for the photodegradation of environmental pollutants.

Construction of P-N Heterojunction Film of Cu2O/α-Fe2O3 for Efficiently Photoelectrocatalytic Degradation of Oxytetracycline.

Photo-Fenton Degradation of Tetracycline and Photoelectrochemical Properties of ZnFe2O4@ZnWO4 Heterostructure Composite Coupling

Rational construction of α-Fe2O3/g-C3N4 heterojunction for effective photo-Fenton-like degradation of tetracycline

Visible Light Assisted Fenton Degradation of Oxytetracycline over Perovskite ErFeO3/porous G-C3n4 Nanosheets P-N Heterojunction

Accelerated Photocatalytic Degradation of Tetracycline Hydrochloride over CuAl2O4/g-C3N4 P-N Heterojunctions under Visible Light Irradiation

A P/N type compounded Cu 2 O/TiO 2 photo-catalytic membrane for organic pollutant degradation

In situ construction of a flower-like Z-scheme Co3O4/CoO heterostructure with superior photoelectrocatalytic performance

Photoeletrocatalytic activity of an n-ZnO/p-Cu2O/n-TNA ternary heterojunction electrode for tetracycline degradation

Interfacial charge transfer effects of α-Fe2O3/Cu2O heterojunction and enhancement mechanism of its photocatalytic oxidation

Enhanced photocatalytic performance of NiFe2O4/ZnIn2S4 p-n heterojunction for efficient degradation of tetracycline

Synthesis of Dual p-n Heterojunction of Ni/Mn-MOF-74/CdS@Co3O4 Photocatalyst as a Photoassisted Fenton-like Catalyst for Removal of Tetracycline Hydrochloride

The Construction of an α-F2O3/Tubular g-C3N4 Z-Scheme Heterojunction Catalyst for the Efficient Photocatalytic Degradation of Tetracycline

Enhanced photoelectrocatalytic degradation of tetracycline using a bifacial electrode of nickel-polyethylene glycol-PbO2//Ti//TiO2-Ag2O

p-n heterojunction constructed by y-Fe2O3 covering CuO with CuFe2O4 interface for visible-light-driven photoelectrochemical water oxidation

Construction of polynary systems by coupling Cd/CdS with magnetic recyclable CuO/Fe2O3/CuFe2O4 nanocomposite for enhancing photo-Fenton degradation of antibiotics

Construction of an interpenetrating manganese residue-derived FeC2O4/CuC2O4 composite with enhanced charge transfer in photo-Fenton reactions via mechanical activation pre-anchoring strategy

Oxygen Vacancy Engineering and Constructing Built-In Electric Field in Fe-g-C3N4/Bi2MoO6 Z-Scheme Heterojunction for Boosting Photo-Fenton Catalytic Degradation Performance of Tetracycline

Construction of Urchin-Like Core-Shell Fe/Fe2O3@UiO-66 Hybrid for Effective Tetracycline Reduction and Photocatalytic Oxidation.

Construction of one-dimensional pn heterojunction TiO2/CuO composite with hierarchical structure and its dual efficient inactivation of Escherichia coli

Hematite-based photoanodes decorated with oxygen-deficient CeO 2 for photoelectrocatalytic degradation of tetracycline: a pulse deposition strategy

Highly Efficient Photocatalytic Degradation of Tetracycline Using a Bimetallic Oxide/Carbon Photocatalyst