Abstract:The design and construction of high strength hydrogels is a widely discussed topic in hydrogel research. In this study, we combined three toughening strategies, including dual network, oriented structure construction and nanophase doping, to develop an alginate/polyacrylamide (PAM)/modified titanium dioxide fiber (TiO2 NF@PAM) dual network composite hydrogel prepared via syringe. The effects of different preparation methods, AM/Alginate ratios, inorganic doping phases and TiO2 NF@PAM/AM ratios on the mechanical properties of composite hydrogels were investigated. The study found that the alginate hydrogel prepared by syringe exhibited superior axial orientation and achieved a tensile strength of (1091 ± 46) kPa. And the composite hydrogel doped with 0.2 wt% TiO2 NF@PAM had a tensile strength of (1006 ± 64) kPa, which was higher than that of the composite hydrogel doped with 0.2 wt% TiO2 nanoparticles (976 ± 66) kPa. The highest tensile strength (1120 ± 67) kPa and elongation at break (182 ± 8) % were achieved when the ratio of TiO2 NF@PAM/AM was 0.6 wt%. The force applied to the gel solution in the syringe affects the orientation of the polymer chains and TiO2 NF@PAM within the gel, which subsequently impacts the mechanical properties of the hydrogel. Therefore, we further investigated the mechanical properties of composite hydrogels under varying propulsion speeds, syringe diameters, and syringe lengths. It was observed that the gel solution's shear strength increased as the syringe diameter decreased. The resulting composite hydrogels were better oriented and had improved mechanical properties. The composite hydrogels' tensile strength peaked at (1117 ± 47) kPa when the syringe advance rate was between 1-7 mL/min. The mechanical properties of the hydrogels were optimal when the syringe length was 30 mm, with a maximum tensile strength of (1131 ± 67) kPa and a tensile ratio of (166 ± 5) %. This study demonstrates the viability of integrating three distinct strengthening methodologies to generate hydrogels of considerable strength. Furthermore, the Alginate/PAM/TiO2 NF@PAM composite hydrogels possess remarkable potential as adaptable, wearable sensors due to their exemplary mechanical properties, knittability, and conductivity.

Highly Tough Bioinspired Ternary Hydrogels Synergistically Reinforced by Graphene/Xonotlite Network

Strong and Ultra-Tough Supramolecular Hydrogel Enabled by Strain-Induced Microphase Separation

Dual Ionically Cross-linked Double-Network Hydrogels with High Strength, Toughness, Swelling Resistance, and Improved 3D Printing Processability

Tough and Fatigue-Resistant Hydrogels with Triple Interpenetrating Networks

High-strength and tough composite hydrogels reinforced by the synergistic effect of nano-doping and triple-network structures

Tough and Resilient Hydrogels Enabled by a Multifunctional Initiating and Cross-Linking Agent

Microgel-Reinforced Hydrogel Films with High Mechanical Strength and Their Visible Mesoscale Fracture Structure

Tough Supramolecular Hydrogels with Excellent Self-Recovery Behavior Mediated by Metal-Coordination Interaction

Strong, tough and anisotropic bioinspired hydrogels

Design and construction of high strength double network hydrogel with flow-induced orientation

Ultrastiff and Tough Supramolecular Hydrogels with a Dense and Robust Hydrogen Bond Network

Ultra-stiff and tough hydrogels based on small but strong hydrophobic associations via low-reactive hydrophilic monomer

Strong and Tough Fibrous Hydrogels Reinforced by Multiscale Hierarchical Structures with Multimechanisms

Bioinspired Structural Composite Hydrogels with a Combination of High Strength, Stiffness, and Toughness

Advanced Lignin‐Based Hydrogels with Superior Stiffness, Toughness, and Sensing Capabilities

Tough Hydrogels with Isotropic and Unprecedented Crack Propagation Resistance

Strong and Tough Cellulose Hydrogels via Solution Annealing and Dual Cross‐Linking

High-Strength, Tough, Fatigue Resistant, and Self-Healing Hydrogel Based on Dual Physically Cross-Linked Network

3D-Printed Hydrogels with High-Strength and Anisotropy Mediated by Chain Rigidity

Rapid fabrication of physically robust hydrogels

A Tough and Stiff Hydrogel with Tunable Water Content and Mechanical Properties Based on the Synergistic Effect of Hydrogen Bonding and Hydrophobic Interaction