Effect of relative density and grain size on the internal flow field during the ballistic penetration of sand
Miao Sun,Jinchen Li,Hongyu Zhang,Runqiang Chi,Baojun Pang,Wuxiong Cao,Jinbiao Fan,Jie Xu,Junxiao Xiao
DOI: https://doi.org/10.1016/j.ijimpeng.2023.104859
IF: 4.592
2023-12-15
International Journal of Impact Engineering
Abstract:Understanding the dynamic response of heterogeneous granular systems under impact and penetration conditions is of great importance in national defense, industrial production, planetary exploration, and even asteroid impacts. The particle flow field is controlled by a complex network of inter-particle force chains. However, the correlation between particle disturbance and penetration resistance is inadequately understood. This paper discusses the application of an accelerometer array for internal flow field measurements during the penetration of ogival-nosed projectiles into a sand target at the velocity of 100 m/s. The response of the sand target was compared for different relative densities (30%, 50% and 70%) and grain sizes (0.3-0.6 mm, 0.6-2.0 mm and 2.0-4.0 mm). The results showed that the pulse propagation and attenuation characteristics were dominated by the relative density, while the effect of grain size was relatively small. In addition, the area of the strong response zone of the particle acceleration field showed an approximately negative correlation with the depth of penetration and a positive correlation with the relative density. However, it was difficult to fully characterize the correlation between the particle sample and the depth of penetration by the particle displacement field. This result suggests that the penetration resistance is positively correlated with the amount of particles imparted with a movement tendency. However, whether the particles are substantially displaced is determined by the competition between the pulse intensity and the inter-particle forces. These findings can deepen the understanding of the granular system behavior under impact and penetration conditions, providing an important reference for resistance modeling and numerical simulation.
engineering, mechanical,mechanics