Abstract:Most MPC (Model Predictive Control) algorithms used in industries and studied in the control academia use a two-term QP (quadratic programming), where the first term is the weighted norm of the output errors, and the second term is that of the input increments. In this work, a DMC (Dynamic Matrix Control) algorithm that uses three-term QP is developed and studied, where the third term is the weighted norm of the output increments. A relationship between the three-term DMC and the two-term DMC is established; and based on that, ideal closed-loop response curves are derived. These results are useful for the tuning of the three-term DMC. Then, a method for comparing two control methods is proposed and it is shown that the three-term DMC outperforms the two-term DMC. The findings are verified using simulation studies. Finally, the three-term DMC is successfully applied to a 1030 MW ultra-supercritical coal-fired power plant. According to simulation study using the identified model, in comparison to traditional two-term DMC, there is a roughly 10% reduction in the standard deviation of load tracking error for similar control efforts. In real-life tests on the power plant, the performance of the three-term DMC is compared to that of the existing PID controller. The load rate of change increased from 0.8%/min to 1.5%/min while the standard deviation of steam pressure decreased 38%; the standard deviations of the main steam temperature and reheat steam temperature decreased more than 40% with their mean values increased by more than 2 ∘C and 4 ∘C respectively.

Modeling and Sliding Mode Predictive Control of the Ultra-Supercritical Boiler-Turbine System with Uncertainties and Input Constraints

Model-based Adaptive Sliding Mode Control of the Subcritical Boiler-Turbine System with Uncertainties

Sliding Mode Prediction Based Control Algorithm for Discrete-Time Non-Linear Uncertain Coupled Systems.

A Composite Nonlinear Control Scheme of the Ultra-Supercritical Boiler-Turbine Unit for Large-Scale Load Accommodation

Research and application of multiple model Predictive Control in Ultra-supercritical boiler-turbine system

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

Multivariable Constrained Predictive Control of 1000 MW Ultra Supercritical Once-Through Boiler-Turbine System

Nonlinear Model Predictive Control of Ultra-Supercritical Once Through Boiler-Turbine Unit

Unknown system dynamics estimator based coordinated control of the ultra supercritical boiler‐turbine unit with coal pulverizing delay for large load accommodation

Multi-model Predictive Control of Ultra-supercritical Coal-fired Power Unit

Two-timescale Nonlinear Model Predictive Control for Flexible Operation of Coal-Fired Power Plant with Post Combustion CO2 2 Capture System

Control of ultra-supercritical once-through boiler-turbine unit using MPC and ESO approaches

Extended State Observer Based Fuzzy Model Predictive Control for Ultra-Supercritical Boiler-Turbine Unit

Sliding Mode Predictive Control of Main Steam Pressure in Coal-fired Power Plant Boiler

Modeling of drum boiler-turbine unit and the model-based coordinated control strategy

Steam Pressure Control of 1 000MW Ultra-Supercritical Coal-Fired Power Unit Based on Multi-Model Predictive Control

A Dynamic Nonlinear Model for a Wide-Load Range Operation of Ultra-Supercritical Once-Through Boiler-Turbine Units

Research on the Application of Multi-model Predictive Control in Coordinated Control of 1,000 MW Ultra-supercritical Unit

Control of boiler-turbine coordinated system using multiple-model predictive approach.

Robust Predictive Control for Boiler-Turbine Coordinated Control System

Multiobjective Operation of Ultra-Supercritical Boiler-Turbine Unit