Abstract:The future of green mobility depends on continued research into alternative energy storage such as batteries, fuel cells and super-capacitors. However, to exceed the demands of current hybrid, plug-in hybrid and electric vehicles, new battery systems with high energy density are required. Magnesium (Mg) is an attractive alternative to current lithium-ion technologies because of the transfer of 2 electrons per magnesium-ion, higher volumetric capacity of magnesium metal compared to lithium metal (3833 mAh/cm3 Mg vs 2061 mAh/cm3 Li), and greater natural abundance [1]. Many challenges must be met to promote magnesium batteries as a practical candidate for the next generation of batteries. One of the pivotal issues is a complete understanding of the Mg deposition and dissolution interface. Recently, advances in electrolyte synthesis has encouraged continued research into high energy density materials for magnesium batteries. Our group introduced a new family of electrolytes for Mg battery based on anions incorporating the B-H motif [2]. Among them, magnesium borohydrides (Mg(BH4)2) provides a segue between classic electrolytes based on Grignard reagents and the new electrolytes, such as magnesium monocarborane (MMC), which stands out as the first simple-salt magnesium compound stable to Mg metal, providing high anodic stability, non-corrosive electrochemistry, and chemically robustness [3]. However, the mechanism of deposition and dissolution of magnesium remains a complex process. Operando electrochemical cells coupled with spectroscopic and microscopic tools are powerful techniques to understand the dynamic processes in batteries. Previously, we have used Operando electrochemical/X-ray absorption to identify the active species in organohaloaluminate electroltyes [4-5], and here we extend that research for (Mg(BH4)2) electrolytes. In combination with electrochemical impedance spectroscopy, we identify the presence of an active interphase required for magnesium deposition and dissolution. For MMC, we have determined that magnesium deposition and dissolution to be able to sustain high-current (10 mA/cm2), high-charge (5 mAh) and cold temperature (0oC) without the presence of magnesium dendrites. We utilize electron microscopy and X-ray photoelectron spectroscopy to elucidate the chemistry and mechanism of the promising anode / electrolyte interphase. [1] Muldoon, J.; Buccur, C.; Gregory, T. Chem. Rev. 2014, 114, 11683. [2] Tutusaus O.; Mohtadi, R.; ChemElectroChem 2015, 2, 51. [3] Tutusaus, O.; Mohtadi, R.; Arthur, T.S.; Mizuno, F.; Nelson, E.G.; Sevryugina, Y.V. Angew. Chem. Int. Ed. 2015, 54, 7900. [4] Arthur et al., Electrochem. Comm., 2012, 24, 43.

High Interfacial Charge Storage Capability of Carbonaceous Cathodes for Mg Batteries

Nanostructured MgFeSiO4/C Cathode Prepared by a Modified Sol-Gel Method for Rechargeable Mg-Ion Batteries

High Capacity Mg Batteries Based on Surface-Controlled Electrochemical Reactions

Anion‐Incorporated Mg‐Ion Solvation Modulation Enables Fast Magnesium Storage Kinetics of Conversion‐Type Cathode Materials

Exploring Hybrid Mg2+/H+ Reactions of C@MgMnSiO4 with Boosted Voltage in Magnesium-ion Batteries

Are Mxenes Suitable As Cathode Materials For Rechargeable Mg Batteries?

Direct insights into the electrochemical processes at anode/electrolyte interfaces in magnesium-sulfur batteries

Solvent-Controlled Charge Storage Mechanisms of Spinel Oxide Electrodes in Mg Organohaloaluminate Electrolytes.

Electrolyte Engineering with Carboranes for Next-Generation Mg Batteries

High Capacity Magnesium Metal Rechargeable Battery Enabled by Dual Ion Chemistry

Catalyzing Desolvation at Cathode-Electrolyte Interface Enabling High-Performance Magnesium-Ion Batteries

Rational Design of Mixed Solvent and Porous Graphene-Supported Spinel Oxide Electrodes for High-Rate and Long Cycle-Life Mg Batteries

Building Organic–Inorganic Robust Interphases from Deep Eutectic Solution for Highly Stable Mg Metal Anode in Conventional Electrolyte

Maximizing Magnesiation Capacity of Nanowire Cluster Oxides by Conductive Macromolecule Pillaring and Multication Intercalation

Designing Gel Polymer Electrolyte with Synergetic Properties for Rechargeable Magnesium Batteries

Novel Electrode Materials for Rechargeable Magnesium Ion Batteries

Toward High‐Performance Mg/S Batteries with M4‐Assisted Mg(AlCl4)2/PYR14TFSI/DME Electrolyte and MoS2@CMK/S Cathode

Tellurium: A High-Performance Cathode for Magnesium Ion Batteries Based on a Conversion Mechanism

The Anode - Magnesium Monocarborane Interface for Metal Deposition and Dissolution

Constructing Efficient Mg(CF3SO3)2 Electrolyte via Tailoring Solvation and Interface Chemistry for High‐Performance Rechargeable Magnesium Batteries

In-situ dynamic catalysis electrode electrolyte interphase enabling Mg2+ insertion in 2D metal-organic polymer for high-capacity and long-lifespan magnesium batteries