Abstract:A novel hollow polyhedron with a heterogeneous CoO/Co9S8/NC has been successfully synthesized, and used as a sulfur host. The heterogeneous CoO/Co9S8/NC balances the redox kinetics of Co9S8 and chemical adsorption of CoO toward LiPSs, and effectively inhibits the shuttle of LiPSs, leading to the improved reversible capacity and durable cyclability for LSBs. Lithium‐sulfur batteries (LSBs) are recognized as the prospective candidate in next‐generation energy storage devices due to their gratifying theoretical energy density. Nonetheless, they still face the challenges of the practical application including low utilization of sulfur and poor cycling life derived from shuttle effect of lithium polysulfides (LiPSs). Herein, a hollow polyhedron with heterogeneous CoO/Co9S8/nitrogen‐doped carbon (CoO/Co9S8/NC) is obtained through employing zeolitic imidazolate framework as precursor. The heterogeneous CoO/Co9S8/NC balances the redox kinetics of Co9S8 with chemical adsorption of CoO toward LiPSs, effectively inhibiting the shuttle of LiPSs. The mechanisms are verified by both experiment and density functional theory calculation. Meanwhile, the hollow structure acts as a sulfur storage chamber, which mitigates the volumetric expansion of sulfur and maximizes the utilization of sulfur. Benefiting from the above advantages, lithium‐sulfur battery with S‐CoO/Co9S8/NC achieves a high initial discharge capacity (1470 mAh g−1 ) at 0.1 C and long cycle life (ultralow capacity attenuation of 0.033% per cycle after 1000 cycles at 1 C). Even under high sulfur loading of 3.0 mg cm−2 , lithium‐sulfur battery still shows the satisfactory electrochemical performance. This work may provide an idea to elevate the electrochemical performance of LSBs by constructing a hollow metal oxide/sulfide/nitrogen‐doped carbon heterogeneous structure.

Efficient Entrapment and Catalytic Conversion of Lithium Polysulfides on Hollow Metal Oxide Submicro-Spheres As Lithium-Sulfur Battery Cathodes

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

3D Hybrid of Co9S8 and N-doped Carbon Hollow Spheres As Effective Hosts for Li-S Batteries

Catalytic Polysulfide Conversion and Physiochemical Confinement for Lithium–Sulfur Batteries

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen‐Doped Carbon Heterostructure for Long‐Cycle‐Life Lithium‐Sulfur Batteries

Simultaneous Immobilization and Conversion of Polysulfides on Co3O4–CoN Heterostructured Mediators Toward High-Performance Lithium–Sulfur Batteries

Fe3C-Fe3O4 Heterostructure Nanoparticles Embedded in Porous Carbon: Immobilization and Kinetic Acceleration of Lithium Polysulfides in Li S Batteries

Catalytic polysulfides immobilization within a S/C-Co-N hollow cathode obtained by nonthermal imprison route

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

Enhanced Polysulfide Regulation of Lithium-Sulfur Batteries by Zns-Sno 2 Nano-Heterostructures

Double-Shelled Co3O4/C Nanocages Enabling Polysulfides Adsorption for High-Performance Lithium–Sulfur Batteries

A hollow Co0.12Ni1.88S2/NiO heterostructure that synergistically facilitates lithium polysulfide adsorption and conversion for lithium-sulfur batteries

Li2S in Situ Grown on Three-Dimensional Porous Carbon Architecture with Electron/Ion Channels and Dual Active Sites As Cathodes of Li-S Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

In Situ Constructing a Catalytic Shell for Sulfur Cathode via Electrochemical Oxidative Polymerization

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Enhanced Immobilization and Accelerated Conversion of Polysulfides by Functionalized Separator for Advanced Lithium Sulfur Batteries

Carbon-coated Mesoporous Fe 3 O 4 Nanospindles with Interconnected Porosities as Polysulfide Mediator for Lithium-Sulfur Batteries

Ferromagnetic 1D-Fe3o4@c Microrods Boost Polysulfide Anchoring for Lithium–Sulfur Batteries