Abstract:Nearly all automated blood pressure (BP) measurement devices assess BP by the oscillometric technique.1, 2 Oscillometric BP readings are derived by measuring the maximal oscillations of the composite pulse wave in the BP cuff, which corresponds to the mean arterial pressure. Systolic and diastolic BP are then estimated by points along the composite pulse wave, using an algorithm that is proprietary to each manufacturer and device. Hence, there is a need to ensure that the estimated BP by automated oscillometric devices reflects BP measured by auscultation. A few automated devices use auscultation to assess Korotkoff sounds by using a microphone.2 Microphones may capture different sound wave lengths and sound intensity than the human ear and there is a potential for sound artifacts to be recorded by automated devices as Korotkoff sounds. Therefore, automated devices that operate using microphones to assess Korotkoff sounds also require an assessment of their ability to estimate BP accurately. An international validation standard and several protocols have been developed to test the ability of automated devices to assess BP accurately in the general public, as well as in special populations, such as children or pregnant women, and special conditions such as arrhythmias.1,3-7 Factors that need to be considered for validation include microphone sensitivity, cuff size, appropriate algorithms, and the reliability and reproducibility of BP readings. Many manufacturers have developed devices that have been rigorously tested by independent investigators by using one or more of these test procedures. Scientists, clinicians, and the public can be reassured that these devices are likely to be accurate in the populations tested. Other devices have been tested independently but the test results were not published. Many government approval agencies do not require independent validation of accuracy according to established validation standards/protocols as mentioned above; rather, they rely only on the manufacturers to show that they have done accuracy tests internally. Furthermore, some validation testing may not include enough people with a wide range of arm sizes to ensure accurate readings in people with small or large arm sizes.8 Thus, many devices currently available on the market for self-monitoring of BP at home or for professional use in the office or hospital have: (1) not been tested independently according to the international standard or a national protocol; (2) have failed independent validation studies; or (3) may not produce accurate readings in those with small or large arms but are still marketed.2 The accuracy of these devices is not assured, and, for devices that fail validation standards, inaccurate BP readings and thereby incorrect treatment decisions are likely. The manufacture and sale of BP measurement cuffs are also problematic. The issues apply not only to automated but also manual auscultatory devices. With the exception of cuffs that automatically adjust for a wide range of arm sizes,9, 10 an accurate BP assessment requires the selection of an appropriate cuff size according to the individual's arm circumference.11 In general, this requires cuffs to be marked with the range of arm circumferences on which the cuff will be able to be used to assess BP accurately. However, some cuffs are not marked, and some may be inaccurately marked. Further, claims that "one size cuff fits all" may not have been validated in studies that had patients with a wide range of arm sizes. Clinicians can manually mark cuffs for the range of arm sizes on which they are likely to be accurate and can also manually assess individual arm circumferences to see what cuff would be proper. Unfortunately, these procedures are time-consuming and rarely done in clinical practice. Ensuring that all BP cuffs, when manufactured, are accurately marked for the range of arm sizes to be used for accurate BP assessment is a crucial and simple step for resolving this problem. Ensuring that the devices have a wide range of cuff sizes and that the devices are validated with the range of cuffs sizes available is also important. Notwithstanding the relevant issues regarding arm sizes, the use of wrist devices to assess BP is becoming more popular. This is likely attributable to ease of use (eg, namely, no need to measure arm circumferences), cost, and usability in obese individuals with cone-shaped upper arms. There are, however, several challenges when using these devices, including that the wrist be held at heart level—an aspect that is not adhered to in many instances. Furthermore, a large proportion of these low-cost devices are not validated according to the described procedures, and, as a rule, are generally not advised to be used as a first option because of overestimation or underestimation of BP. Dr Mark Niebylski and Kimbree Redburn are paid WHL consultants but report no other conflicts. Dr Ji-Guang Wang reports receiving research grants and consulting fees from several BP measuring device companies including A&D, AVITA, Honsun, Omron, and Rossmax but reports no other conflicts. Dr Michael Weber is a consultant for and received travel support from Omron but reports no other conflicts. All other primary authors including those from WHL and the ISH report no conflicts of interest.

Validation of Non-Invasive Central Blood Pressure Devices: Artery Society Task Force (abridged) Consensus Statement on Protocol Standardization

Cuffless Blood Pressure Measuring Devices: Review and Statement by the European Society of Hypertension Working Group on Blood Pressure Monitoring and Cardiovascular Variability

Validation Protocols for Blood Pressure Measuring Devices in the 21st Century.

Working Group on Blood Pressure Monitoring of the European Society of Hypertension International Protocol for Validation of Blood Pressure Measuring Devices in Adults.

A Universal Standard for the Validation of Blood Pressure Measuring Devices: Association for the Advancement of Medical Instrumentation/European Society of Hypertension/International Organization for Standardization (AAMI/ESH/ISO) Collaboration Statement.

O31 VALIDATION ASSESSMENT OF A CUFF-BASED CENTRAL BLOOD PRESSURE DEVICE ACCORDING TO ARTERY SOCIETY RECOMMENDATIONS

A Call to Regulate Manufacture and Marketing of Blood Pressure Devices and Cuffs: A Position Statement from the World Hypertension League, International Society of Hypertension and Supporting Hypertension Organizations

Accuracy of Automated Cuff Blood Pressure Monitors in Special Populations: International Organization for Standardization (ISO) Task Group Report and Call for Research

Improving the Accuracy of Blood Pressure Measurement

Lancet Commission on Hypertension Group position statement on the global improvement of accuracy standards for devices that measure blood pressure

Improving the accuracy of blood pressure measurement: the influence of the European Society of Hypertension International Protocol (ESH-IP) for the validation of blood pressure measuring devices and future perspectives.

Requirements for design and function of blood pressure measuring devices used for the management of hypertension: Consensus Statement by the European Society of Hypertension Working Group on Blood Pressure Monitoring and Cardiovascular Variability and STRIDE BP

P074 STRIDE BP SYSTEMATIC REVIEW OF PUBLISHED VALIDATION STUDIES OF BLOOD PRESSURE MEASURING DEVICES

Accuracy of Cuff-Measured Blood Pressure

O20 CURRENT 24-HOUR AMBULATORY BLOOD PRESSURE TECHNOLOGIES SHOULD BE RECONSIDERED AS THE REFERENCE STANDARD FOR VALIDATION OF CUFFLESS BLOOD PRESSURE DEVICES

Accuracy of Cuff-Measured Blood Pressure: Systematic Reviews and Meta-Analyses.

2024 Recommendations for Validation of Noninvasive Arterial Pulse Wave Velocity Measurement Devices

Wearable cuffless blood pressure monitoring devices: a systematic review and meta-analysis

Validation protocols for blood pressure-measuring devices: status quo and development needs

PS-C08-1: ACCURACY OF CUFF BLOOD PRESSURE AND SYSTOLIC BLOOD PRESSURE AMPLIFICATION

STRIDE BP International Initiative for Accurate Blood Pressure Measurement: Systematic Review of Published Validation Studies of Blood Pressure Measuring Devices