Abstract:We are designing a real-time spectral imaging system using micro-LEDs and a high-speed micro-camera for potential endoscopic applications. Currently, gastrointestinal (GI) endoscopic imaging has largely been limited to white light imaging (WLI), while other endoscopic approaches have seen advancements in imaging techniques including fluorescence imaging, narrow-band imaging, and stereoscopic visualization. To further advance GI endoscopic imaging, we are working towards a high-speed spectral imaging system that can be implemented with a chip-on-tip design for a flexible endoscope. Hyperspectral imaging has potential applications in a variety of imaging procedures with its ability to discern spectral footprints of the imaging field in a series of two-dimensional images at different wavelengths. For investigating the feasibility of a real-time LED-based hyperspectral imaging system for endoscopic applications we designed and developed a large-scale prototype using through-hole LEDs, which is further analyzed as we design our future system. For high quality imaging, the LED array must be designed with the specific illumination patterns and intensities of each LED considered. We present our work in optimizing our current LED array through optical simulations performed in silico. Damped least squares and orthogonal descent algorithms are implemented to maximize irradiance power and improve illumination homogeneity at several working distances by adjusting radial distances of each LED from the camera. With our prototype LED-based hyperspectral imaging system, the simulation and optimization approach achieved an average increase of 8.36 ± 8.79% in irradiance and a 4.3% decrease in standard deviation at multiple working distances and field-of-views for each LED, as compared to the original design, leading to improved image quality and maintained acquisition speeds. This work highlights the value of in silico optical simulation and provides a framework for improved optical system design and will inform design decisions in future works.

Optimized Lighting Method of Applying Shaped-Function Signal for Increasing the Dynamic Range of LED-multispectral Imaging System.

An Extending Dynamic Range Method Based on Digital Image Synthesis

Single-pixel Multispectral Imaging Based on Macropixel Segmentation Method

A High-Efficiency Acquisition Method of LED Multispectral Images Using Gray Code Based Square Wave Frequency Division Modulation

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Contrast Enhancement Based On Entropy And Reflectance Analysis For Surgical Lighting

Optimum method of image acquisition using sawtooth-shaped-function optical signal to improve grey-scale resolution

Investigation of self-adaptive LED surgical lighting based on entropy contrast enhancing method

Optimum Method of Applying and Removing a Shaped-Function Signal for Low-Light-level Image Detection.

Improved Method on Image Detection at Low Light Level Using a Sinusoidal-Shaped-function Signal

Portable Multi-Spectral Lens-Less Microscope with Wavelength-Self-calibrating Imaging Sensor

Multispectral Imaging Based on a Multichannel LED System and RGB Camera

Optimization of a real-time LED based spectral imaging system

Multispectral Microimaging System with Narrowband LED Illumination

A Deep Learning-Aided Remote Spectrally Tunable LED Light Source Integrated System

Enhancing Local Color Contrast by Optimizing Multichannel LED Light Sources

Analyses of multi-color plant-growth light sources in achieving maximum photosynthesis efficiencies with enhanced color qualities

Skin Lighting Study Based On Multispectral Images

Spectral Optimization of White LED Based on Mesopic Luminance and Color Gamut Volume for Dim Lighting Conditions

Spectral Estimation of Tunable LED Light Source Using Digital Camera Based on Matrix Factorization

Illumination Adaptation in a Multi-Wavelength Opto-Electronic Patch Sensor