Abstract:CONSPECTUS: Implantable biosensors represent a rapidly developing direction with a wide range of applications in biotechnology and life science. For example, the detection of neurotransmitters in the brain has attracted a lot of attention because of their essential effects for neural activity. The in vivo acute detection of chemicals has been developed for decades, but there are few reports about in vivo chronic monitoring of chemicals probably due to two reasons. First, it is difficult to form stable interfaces between biosensors and tissues. Specifically, most of implantable biosensors are based on stiff electrode materials such as carbon fibers, whose moduli are several orders of magnitude higher than these of soft biological tissues. The mechanical mismatch between them will cause severe inflammatory response during chronic applications. Although some flexible neural probes with mesh geometry consisting of polymer and metal and polymer composite fibers have been employed in chronic electrophysiological recording, they are rarely employed for chronic monitoring of chemicals. Second, electrode deteriorations associated with degradation and fouling of functional materials make chemical recognitions difficult in dynamic environment. Generally, biosensors usually need to be modified with several functional materials including a recognition layer in order to identify specific chemicals from various untargeted chemicals. Although nanomaterials with high surface areas are reported to enhance the loading and immobilization of recognition layers so as to improve the sensitivity of biosensors, nanostructured and soft microelectrodes with high specific surface areas are rarely employed for long-term monitoring of chemicals in vivo. In this Account, we highlight our efforts toward flexible and miniaturized implantable fiber biosensors based on carbon nanotube (CNT) fibers for stable interfaces in vivo. We first summarize the assembly structure of CNT fiber electrodes and their mechanical, electrical, electrochemical, and biocompatible properties. Then we present a family of fiber biosensors by modifying CNT fibers with different recognition materials to detect multiple chemicals in vivo. After that, all-in-one fiber organic electrochemical transistors are described with higher sensitivity and lower detection limit, aiming to detect chemicals with low concentrations and trace changes in the deep brain. Finally, considering that soft implantable biosensors are difficult to be implanted without assistance, we introduce a neural probe with alterable moduli for direct implantation into the mouse brain and forming a stable interface with brain tissues. All three kinds of fiber biosensors are soft with mechanical properties matching biological tissues, remaining stable under deformation and showing high biocompatibility for long-term in vivo applications. Finally, a brief summary of challenges and outlooks in this field is presented.

Carbon-Nanotube-Wrapped Spider Silks for Directed Cardiomyocyte Growth and Electrophysiological Detection.

Carbon Nanotubes Facilitate Silk Hierarchical Assembly by Dry Drawing

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Carbon nanotubes on a spider silk scaffold

Solvent-Free Fabrication of Carbon Nanotube/Silk Fibroin Electrospun Matrices for Enhancing Cardiomyocyte Functionalities.

Tuning the Conductivity and Inner Structure of Electrospun Fibers to Promote Cardiomyocyte Elongation and Synchronous Beating.

Strain-insensitive Fiber Sensors Bioinspired by Spider Silk with a Multilevel Helical Structure

Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network

Biocompatible Carbon Nanotube-Based Hybrid Microfiber for Implantable Electrochemical Actuator and Flexible Electronic Applications

Bioinspired Single-Walled Carbon Nanotubes As a Spider Silk Structure for Ultrahigh Mechanical Property.

Functionalized helical fibre bundles of carbon nanotubes as electrochemical sensors for long-term in vivo monitoring of multiple disease biomarkers

Electrospun Poly(lactic-co-glycolic acid)/Multiwalled Carbon Nanotube Nanofibers for Cardiac Tissue Engineering

Implantable Fiber Biosensors Based on Carbon Nanotubes

Designed Multifunctional Spider Silk Enabled by Genetically Encoded Click Chemistry

Top-Down Extraction of Silk Protein Nanofibers by Natural Deep Eutectic Solvents and Application in Dispersion of Multiwalled Carbon Nanotubes for Wearable Sensing.

Highly Sensitive, Durable, and Multifunctional Sensor Inspired by a Spider

From Molecular Reconstruction of Mesoscopic Functional Conductive Silk Fibrous Materials to Remote Respiration Monitoring

Electroconductive nanoengineered biomimetic hybrid fibers for cardiac tissue engineering

Biomimetic Mechanically Enhanced Carbon Nanotube Fibers by Silk Fibroin Infiltration

Novel Biomimetic “spider Web” Robust, Super‐Contractile Liquid Crystal Elastomer Active Yarn Soft Actuator

Carbon Nanoscroll-Silk Crystallite Hybrid Structures with Controllable Hydration and Mechanical Properties