Abstract:Electrochemical capacitors (supercapacitors) have attracted intense attention due to their high power density, fast charge-discharge process, long cycle life and used in many practical applications. Ni-Co composites, also known as ternary metal composites, have excited great interest in recent years because of their high-performance in supercapacitors. Owing to the coupling of two metal species, these materials could render the composites with rich redox reactions and improved electronic conductivity, which are beneficial to electrochemical applications. In particular, the tunable compositions in the Ni-Co oxides provide vast opportunities to manipulate the crystal structure and its physical/chemical properties. During the past years, different shapes and structures of Ni-Co oxides/sulfides were investigated and most of the researches were focused on NiCo2X4 (X=O, S). Very few works investigated Ni-Co composites with different Ni-Co molar ratio and its fabrication of free standing electrode structure. Here we report the interesting formation of Ni-Co oxides and Ni-Co sulfide nanowire arrys (NWAs) with Ni/Co molar ratio at 1: 1 and their derived free standing structure on different substrates for ECs. Ni-Co oxides NWAs were synthesized on ordered TiO2 nanotubes and Ni foam respectively by a facile hydrothermal method. Ni-Co sulfides NWAs were fabricated through S2- ion exchange using synthesized Ni-Co oxides nanowires as precursor. The electrochemistry testes showed that this self-supported electrode is able to deliver ultrahigh specific capacitance. To raise the cell voltage and thereby boost the energy density more effectively, we use the Ni-Co sulfides NWAs for the battery-like Faradic electrode and activated carbon for the capacitive electrode to compose an asymmetric cell, and this has extended the cell voltage to 1.8 V in an aqueous electrolyte, resulting in high energy density, high power density and good cycling stability all together. To the best of our knowledge, such a prototype device has not been fabricated and explored before. As we all know, dimensionality and rational design of electrode architectures plays a crucial role in determining materials' fundamental properties and the electrochemical performance of supercapacitor. For a proof-of-concept, Ni-Co layered double hydroxides (LDH), NiCo2O4 and NiCo2S4 nanosheets supported on carbon fiber paper (CFP) substrate are prepared in our next work. When tested as the pseudo-capacitor positive electrode, the self-support nanosheets on CFP demonstrate good performance and rate capability as well as excellent cycling life, which contribute to the unique 2D nanosheets structure supported on 3D conductive CFP substrate with open permeable channels, facilitating electrolyte penetration and ensuring more efficient ion diffusion and faster electron transport. The asymmetric supercapacitor based on pseudocapacitance of both electrodes is further first realized by using NiCo2S4 nanosheets and FeOOH nanorods as positive and negative materials, respectively. And it exhibits high energy density and power density as well as outstanding cycling life. Figure 1

Cellular Structure Fabricated on Ni Wire by a Simple and Cost-Effective Direct-Flame Approach and Its Application in Fiber-Shaped Supercapacitors

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

A Metal-Organic Framework Derived Hierarchical Nickel-Cobalt Sulfide Nanosheet Array on Ni Foam with Enhanced Electrochemical Performance for Supercapacitors

Core-Shell Assembly Of Carbon Nanofibers And A 2d Conductive Metal-Organic Framework As A Flexible Free-Standing Membrane For High-Performance Supercapacitors

Micron/nanoporous Architecture Sculptured on Ni Wire Via Direct-Flame Treatment with Tunable Porosity for Fiber-Shaped Supercapacitors

Cellular Ni Sheet Created by a Simple Oxidation-Reduction Process for Enhanced Supercapacitor Performance

In Situ Fabrication of Cellular Architecture on Silver Metals Using Methane/oxygen Gas Mixture and Its Application for Energy Storage

Hierarchically Nanostructured Carbon Fiber-Nickel-carbon Nanotubes for High-Performance Supercapacitor Electrodes

Ni(Oh)(2) Nanosheet @ Fe2o3 Nanowire Hybrid Composite Arrays for High-Performance Supercapacitor Electrodes

Electrochemical Activation‐Induced Structural Transformation in Ni(OH)2/Ti3C2Tx/NF Systems with Enhanced Electrochemical Performance for Hybrid Supercapacitors

In-situ fabrication of carbon-metal fabrics as freestanding electrodes for high-performance flexible energy storage devices

NiO-Microflower Formed by Nanowire-weaving Nanosheets with Interconnected Ni-network Decoration As Supercapacitor Electrode

High-quality metal oxide core/shell nanowire arrays on conductive substrates for electrochemical energy storage.

Hollow Nano-flowers NiCo2O4@Nb2COx MXene Heterostructure via Interfacial Engineering for High-performance Flexible Supercapacitor Electrodes

NiO hierarchical hollow nanofibers as high-performance supercapacitor electrodes

Bi-metal Organic Framework Nanosheets Assembled on Nickel Wire Films for Volumetric-Energy-dense Supercapacitors

Construction of MnO2 Nanowires@ni1−xcoxoy Nanoflake Core-Shell Heterostructure for High Performance Supercapacitor

Integrated Carbon Nanosheet Frameworks Inlaid with Nickel Phosphide Nanoparticles by Substrate-Free Chemical Blowing and Phosphorization for Aqueous Asymmetric Supercapacitor

Synthesis of Ni-Co Oxides/Sulfides for Electrochemical Capacitors

Hierarchical Mesoporous Nickel Cobaltite Nanoneedle/carbon Cloth Arrays As Superior Flexible Electrodes for Supercapacitors

Hierarchical MnO<sub>2</sub> nanowire arrays consisting of multitripod structures grown on porous carbon nanofibers for high-performance supercapacitor electrode