Abstract:We present a novel electron transport (ET) polymer composed of polyfluorene grafted with a K(+)-intercalated crown ether involving six oxygen atoms (PFCn6:K(+)) for bulk-heterojunction polymer solar cells (PSCs) with regioregular poly(3-hexylthiophene) (P3HT) as the donor and indene-C(60) bisadduct (ICBA) or indene-[6,6]-phenyl-C(61)-butyric acid methyl ester (IPCBM) as the acceptor in the active layer and with Al or Ca/Al as the cathode. A remarkable improvement in the power conversion efficiency (PCE) (measured in air) was observed upon insertion of this ET layer, which increased the PCE from 5.78 to 7.5% for a PSC with ICBA and Ca/Al (5.53 to 6.63% with IPCBM) and from 3.87 to 6.88% for a PSC with ICBA and Al (3.06 to 6.21% with IPCBM). This ET layer provides multiple functionalities: (1) it generates an optical interference effect for redistribution of light intensity as an optical spacer; (2) it blocks electron-hole recombination at the interface with the cathode; (3) it forms an interfacial dipole that promotes the vacuum level of the cathode metal; and (4) it enhances electron conduction, as evidenced by (1) the increase in total absorption of 1:1 w/w P3HT:ICBA by a factor of 1.3; (2) the reduction in the hole-only current density profile by a factor of 3.3 at 2.0 × 10(5) V/cm; (3) the decrease of 0.81 eV in the work function of Al from 4.28 to 3.47 eV, as determined by UV photoelectron spectroscopy; and (4) the decrease in the series resistance of PSCs with ICBA and Al by a factor of 4.5, as determined by the current-voltage characteristic under dark conditions; respectively. The PSC of 7.5% is the highest among the reported values for PSC systems with the simplest donor polymer, P3HT.

Interface Passivation and Electron Transport Improvement of Polymer Solar Cells Through Embedding A Polyfluorene Layer

Interface Passivation and Electron Transport Improvement Via Employing Calcium Fluoride for Polymer Solar Cells.

Boosted Electron Transport and Enlarged Built-In Potential by Eliminating the Interface Barrier in Organic Solar Cells.

Passivation Effect of Composite Organic Interlayer on Polymer Solar Cells

Employing Inorganic/Organic Hybrid Interface Layer to Improve Electron Transfer for Inverted Polymer Solar Cells

Efficiency Improvement of Inverted Organic Solar Cells Via Introducing A Series of Polyfluorene Dots in Electron Transport Layer

Versatile Dual Organic Interface Layer for Performance Enhancement of Polymer Solar Cells

Nickel Oxide and Polytetrafluoroethylene Stacked Structure As an Interfacial Layer for Efficient Polymer Solar Cells

Influence Of A Polyelectrolyte Based-Fluorene Interfacial Layer On The Performance Of A Polymer Solar Cell

Eliminating Light Soaking Effect of Inverted Polymer Solar Cells Functionalized with a Conjugated Macroelectrolyte Electron-Collecting Interlayer

Improvement in Polymer Solar Cell Performance and Eliminating Light Soaking Effect Via UV-light Treatment on Conjugated Polyelectrolyte Interlayer

A Facile Two-Step Interface Engineering Strategy to Boost the Efficiency of Inverted Ternary-Blend Polymer Solar Cells over 10%

Facilitating Electron Extraction of Inverted Polymer Solar Cells by Using Organic/inorganic/organic Composite Buffer Layer

Dibenzothiophene-S,S-dioxide and Bispyridinium-Based Cationic Polyfluorene Derivative As an Efficient Cathode Modifier for Polymer Solar Cells

Performance Enhancement in Inverted Polymer Solar Cells Incorporating Ultrathin Au and LiF Modified ZnO Electron Transporting Interlayer

A Simple and Low-Cost Surface Treatment to Facilitate Charge Extraction and Eliminate Light Soaking of Polymer Solar Cells

Boosting Electron Extraction in Polymer Solar Cells by Introducing a N-Type Organic Semiconductor Interface Layer

Enhanced Electron Extraction Capability of Polymer Solar Cells Via Modifying the Cathode Buffer Layer with Inorganic Quantum Dots

Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether As an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction.

Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell.

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination