Abstract:An ultracompact and broadband polarization beam splitter (PBS) based on the polarization-dependent critical guiding condition of an asymmetrical directional coupler is proposed. The device consists of a pair of silicon waveguides with different height and width. Due to the different cutoff conditions for the TE and TM polarization modes, it is possible to have the TM mode guided in one waveguide while the TE mode is supported in both. Therefore, only the phase-matching condition for the cross-coupling of the TE mode needs to be considered. This approach not only simplifies the design procedures but also significantly improves device performance with smaller total length and larger bandwidth. Finally, regardless of the contribution of S-bend waveguides, our proposed PBS has a coupling region as short as 0.2 mu m, which is the shortest reported until now. The simulation result shows that the extinction ratios for the TE and TM polarization are 13.5 and 16.6 dB at their respective output ports, and their insertion losses are 0.29 and 0.13 dB, respectively. Numerical simulations also show that the device offers a very large bandwidth (similar to 140 nm) with large extinction ratio (> 10 dB) and low insertion loss (< 1 dB). (C) 2015 Optical Society of America

Compact and Fabrication-Tolerant Polarization Splitter Based on Horizontal Triple-Slot Waveguide.

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Compact Polarization Beam Splitter for Silicon-Based Slot Waveguides Using an Asymmetrical Multimode Waveguide

Ultracompact and Broadband Polarization Beam Splitter Based on Polarization-Dependent Critical Guiding Condition

Ultra-Broadband And Ultra-Compact Polarization Beam Splitter Based On A Tapered Subwavelength-Grating Waveguide And Slot Waveguide

Compact and Broadband Silicon-Based Polarization Beam Splitter Using Asymmetric Directional Couplers Embedded with Subwavelength Gratings and Slots.

Polarization beam splitter based on a silicon nitride-silica-silicon horizontal slot waveguide

Compact Polarization Beam Splitter Based on a Three-Waveguide Asymmetric Coupler with a 340-Nm-thick Silicon Core Layer

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Ultracompact and Broadband Silicon-Based Polarization Beam Splitter Using an Asymmetrical Directional Coupler

High Extinction-Ratio Compact Polarisation Beam Splitter on Silicon

Research on a Broadband Compact Polarization Beam Splitter

Broadband, Fabrication-Tolerant Polarization Beam Splitters Based on a Tapered Directional Coupler

Design of A Compact Polarization Splitter in Horizontal Multiple-Slotted Waveguide Structures

Ultracompact polarization beam splitter based on hybrid plasmonic waveguide

Ultra-Compact Mode (De)Multiplexer and Polarization Beam Splitter Based on Tapered Bent Asymmetric Directional Couplers

CMOS-compatible and Fabrication-Tolerant MMI-based Polarization Beam Splitter

Highly fabrication tolerant InP based polarization beam splitter based on p-i-n structure