Abstract:The characteristics of mode-locked noise-like pulses generated from a passively mode-locked fiber oscillator are experimentally investigated. By carefully adjusting the two polarization controllers, stable mode-locked noise-like pulse emission with a high radio frequency signal/noise ratio of >55 dB is successfully achieved, ensuring the safety and possibility of high power amplification. To investigate the amplification characteristics of such pulses, one all-fiber master oscillator power amplifier (MOPA) is built to boost the power and energy of such pulses. Amplified noise-like pulses with average output power of 423 W, repetition rate of 18.71 MHz, pulse energy of 22.61 mu J, pulse duration of 72.1 ps and peak power of 314 kW are obtained. Near diffraction-limited beam is also demonstrated with M-2 factor measured at full power operation of similar to 1.2 in the X and Y directions. The polarization extinction ratio at output power of 183 W is measured to be similar to 13 dB. To the best of our knowledge, this is the first demonstration of high-power amplification of noise-like pulses and the highest peak power ever reported in all-fiber picosecond MOPAs. The temporal self-compression process of such pulses and high peak power when amplified make it an ideal pump source for generation of high-power supercontinuum. Other potential applications, such as material processing and optical coherent tomography, could also be foreseen.

High-power transverse-mode-switchable all-fiber picosecond MOPA.

100 W all fiber picosecond MOPA laser.

500 W level high power fiber MOPA laser with switchable output modes

500 W Level MOPA Laser with Switchable Output Modes Based on Active Control.

High efficiency, high repetition rate, all-fiber picoseconds pulse MOPA source with 125 W output in 15 μm fiber core

High-Energy, Wavelength-Tunable Picosecond All-Fiber Laser Based On Active Mode-Locking

High-power All-Fiber Picosecond MOPA Laser Based on Hybrid-Doped Yb Fibers

High Power LP11 Mode Supercontinuum Generation from an All-Fiber MOPA.

15 W high OSNR kHz-linewidth linearly-polarized all-fiber single-frequency MOPA at 1.6 μm.

High-peak-power and high-average-power pico-second mode-locked all-fiberized MOPA with near diffraction-limited beam quality

All-fiber Picoseconds MOPA Laser with a Narrow Spectrum Output

High Average/peak Power Linearly Polarized All-Fiber Picosecond MOPA Seeded by Mode-Locked Noise-Like Pulses

608w Average Power Picosecond All Fiber Polarization-Maintained Amplifier With Narrow-Band And Near-Diffraction-Limited Beam Quality

1016Nm All Fiber Picosecond Mopa Laser with 50w Output

High-power Multichannel PPMgLN-based Optical Parametric Oscillator Pumped by a Master Oscillation Power Amplification-Structured Q-switched Fiber Laser

2.02 kW and 4.7 GHz linewidth near-diffraction-limited all-fiber MOPA laser

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

109 W Khz-Linewidth One-Stage All-Fiber Linearly-Polarized MOPA Laser at 1560 Nm

15 W High OSNR Khz-Linewidth Linearly-Polarized All-Fiber Single-Frequency MOPA at 16 Μm

All-fiberized Tm-doped Fiber MOPA with 30-W Output Power

122-W High-Power Single-Frequency MOPA Fiber Laser in All-Fiber Format