Abstract:The present paper introduces the stray light and bandpass correction methods for spectrometers. The line spread function of spectrometer is characterized by a He-Ne laser. Assuming that the spectrometer is a wavelength invariable system, the stray light distribution matrix is constructed by the derived line spread functions. The stray light correction matrix is then derived by matrix conversion from the stray light distribution matrix. The measured signals of the spectrometer are finally multiplied by the stray light correction matrix to correct the stray light errors. The bandpass functions of the spectrometer are characterized in three different wavelength ranges, respectively. And then three groups of bandpass correction coefficients are calculated accordingly. The calculation is divided into several steps. Given the measurement results at the target wavelength position and the ones on the neighbor bandwidths, the bandpass correction results are obtained by weight averaging of them. The bandpass correction coefficients are used as the weights. The two correction methods are applied to a multi-channel fast spectrometer to measure LEDs of different color. The results show that the stray light and the bandpass errors can be corrected effectively. The chromaticity coordinates of the LEDs are corrected by (-0.003, 0.007) for the maximum. Furthermore, the method introduced in this paper can reduce the application cost, simplify the calculation under a reasonable precision, and make the application of the correction easier.

Spectral Design Methods for Multi-Channel LED Light Sources Based on Differential Evolution.

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Spectral Design Method to Simulate Tunable Spectra of Various Light Sources Based on Multi-Channel LEDs

Spectrum measurement for LED-based spectrum-tunable source

Differential evolution for the optimisation of multi-band white LED light sources

Accurate Optical Optimization of Light-Emitting Diodes with Consideration of Coupling Between Purcell Factor and Transmittance Coefficient

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Contrast Enhancement Based On Entropy And Reflectance Analysis For Surgical Lighting

Wavelength Dependence of Colorimetric Properties of Lighting Sources Based on Multi-Color LEDs

Optical design for uniform color mixing illumination system

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Spectral Assemblage Using Light Emitting Diodes to Obtain Specified Lighting Characteristics.

Enhancing Local Color Contrast by Optimizing Multichannel LED Light Sources

Channel Selection for Multispectral Color Imaging Using Binary Differential Evolution.

Spectral Optimization of White LED Based on Mesopic Luminance and Color Gamut Volume for Dim Lighting Conditions

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Circadian-effect Engineering of Solid-State Lighting Spectra for Beneficial and Tunable Lighting.

Design of Optocoupler for Synthesizing Four Color Spectra

Beam Shaping for Multicolour Light-Emitting Diodes with Diffractive Optical Elements

A Spectral Assembly Algorithm and Mismatch Evaluation Index for Simulating Solar Spectra Using A Variety of LED Monochromatic Optical Chips

A Deep Learning-Aided Remote Spectrally Tunable LED Light Source Integrated System