Abstract:Lithium-sulfur (Li-S) batteries are widely regarded as the next-generation energy storage technology, due to their high potential in energy density and a low projected cost. Practical applications of such batteries are plagued with radical challenges that mainly stem from two factors. First, both sulfur and its final lithiation product, Li2S, are insulating. Thus, the reaction kinetics is slow and often leads to a low attainable capacity. Second, active material dissolve in the electrolyte in the form of lithium polysulfides. This dissolution causes a series of problems, including loss of cathode materials by diffusion away from the cathode, collapse of the cathode structure, and the polysulfide shuttle effect. As a result, Li-S batteries commonly show fast capacity decay and low coulombic efficiency. Herein, we report the exceptional battery performance of porous carbon-sulfur composite microspheres, PSC-S, that benefited from simultaneous control of nanostructure and microscale particle morphology. The porous carbon microspheres (PSC) was synthesized as the sulfur host,by combining emulsion polymerization and evaporation-induced self-assembly (EISA) process, with a good control of both pore structure and microscale particle morphology. Such material not only demonstrated superioty in attainable capacity, but also in several other critical parameters for the development of high-energy Li-S batteries. PSC-S composite boasts a high tap density of 1.08 g/ml and contains 75 wt.% sulfur embedded into the mesopores of its carbon framework. At a high sulfur loading of 5 mg-S/cm2 and 60wt.% sulfur content in the electrode, this material delivers both high gravimetric and high volumetric capacity with excellent retention. Carbon nanotubes (CNTs) can also be readily incorporated into the microspherical structure in the synthesis process to form a porous spherical carbon-carbon nanotube-sulfur composite (PSC-CNT-S). CNT incorporation effectively raises the conductivity of the composite, and thus significantly improves its high-rate performance. At a high current density of 2.8 mA/cm2, an initial capacity of 1100 mAh/g and a reversible capacity of 700 mAh/g after 200 cycles were achieved in PSC-CNT-S. The resultant areal capacity of over 3.5 mAh/cm2 is much higher than in previous reports of Li-S cathodes fabricated using coating techniques.

Superior Rate Capability of a Sulfur Composite Cathode in a Tris(trimethylsilyl)borate-Containing Functional Electrolyte.

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Phosphorous Pentasulfide As A Novel Additive for High-Performance Lithium-Sulfur Batteries

Cathode Materials: Phosphorous Pentasulfide as a Novel Additive for High-Performance Lithium-Sulfur Batteries (Adv. Funct. Mater. 8/2013)

Improved Rate Performance of Lithium Sulfur Batteries by In-Situ Anchoring of Lithium Iodide in Carbon/Sulfur Cathode

Concrete-like High Sulfur Content Cathodes with Enhanced Electrochemical Performance for Lithium-Sulfur Batteries

Safer Lithium-Sulfur Battery Based on Nonflammable Electrolyte with Sulfur Composite Cathode

Sulfur-containing polymer/carbon nanotube composite cathode materials for high-energy lithium–sulfur batteries

Mesoporous Carbon-Sulfur Composite Microspheres with Multiscale Morphology Control to Achieve High Areal Capacity for Lithium-Sulfur Battery Cathodes

Three-dimensional Laminated Carbon-Sulfur Composite Cathodes Derived from Trichoderma Spores for Lithium-Sulfur Batteries

High-Rate and Long-Term Cycle Stability of Li-S Batteries Enabled by Li2S/TiO2-Impregnated Hollow Carbon Nanofiber Cathodes.

Enhanced Sulfur Transformation by Multifunctional FeS2/FeS/S Composites for High‐Volumetric Capacity Cathodes in Lithium–Sulfur Batteries

Sulfur/carbon cathode material chemistry and morphology optimisation for lithium-sulfur batteries

A Novel Ternary Sulfur/carbon@tin Dioxide Composite with Polysulfides-Adsorptive Shell and Conductive Core As High-Performance Lithium‑sulfur Battery Cathodes

Sulfur/carbon cathode composite with LiI additives for enhanced electrochemical performance in all-solid-state lithium-sulfur batteries

A Multi-Layered Ti3C2/Li2S Composite As Cathode Material for Advanced Lithium-Sulfur Batteries

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries

Duplex Component Additive of Tris(trimethylsilyl) Phosphite-Vinylene Carbonate for Lithium Sulfur Batteries

Synergistic improving sulfur reduction reaction by VS 4 embedded N-doped carbon fiber composite host towards practicable lithium sulfur batteries

Electrochemical Polymerization of Nonflammable Electrolyte Enabling Fast-Charging Lithium-Sulfur Battery

A MnO 2 /Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries.