Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Transforming a Simple Commercial Glue into Highly Robust Superhydrophobic Surfaces Via Aerosol-Assisted Chemical Vapor Deposition.

A Facile Approach to Superhydrophobic Coating from Direct Polymerization of “super Glue”

Robust Superhydrophobic Materials with Outstanding Durability Fabricated by Epoxy Adhesive-Assisted Facile Spray Method

A simple method to make mechanically robust, adhesive and superhydrophobic surface based on epoxy resin

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

A Facile and Novel Emulsion for Efficient and Convenient Fabrication of Durable Superhydrophobic Materials

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Investigation on fabrication of durable superhydrophobic surface based on multi-adhesive strategy

Production of an EP/PDMS/SA/AlZnO Coated Superhydrophobic Surface through an Aerosol-Assisted Chemical Vapor Deposition Process

Large-scale Fabrication of Durable and Robust Super-Hydrophobic Spray Coatings with Excellent Repairable and Anti-Corrosion Performance

Superamphiphobic Surfaces with Robust Self-Cleaning, Abrasion Resistance and Anti-Corrosion

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Superhydrophobic Surface on Aeronautical Materials Via the Deposition of Nanoparticles and a PDMS Seal

Inverse Infusion Processed Hierarchical Structure Towards Superhydrophobic Coatings with Ultrahigh Mechanical Robustness

Robust and transparent superamphiphobic coating prepared via layer-by-layer spraying

A Facile All-Solution-Processed Surface with High Water Contact Angle and High Water Adhesive Force

Robust translucent superhydrophobic PDMS/PMMA film by facile one-step spray for self-cleaning and efficient emulsion separation

Enhancing Durability of Superhydrophobic Surfaces Via Nanoparticle-Induced Bipolar Interface Effects and Micro-Nano Composite Structures: A Femtosecond Laser and Chemical Modification Approach

A Versatile and Efficient Method to Fabricate Durable Superhydrophobic Surfaces on Wood, Lignocellulosic Fiber, Glass, and Metal Substrates

Superamphiphobic Ridge-Like Surfaces Produced by a Layer-by-layer Self-Assembly under Electrophoretic Deposition of Fluorinated Nanoparticles for Comprehensive Protection