Abstract:The flow condensation heat transfer coefficient of R134a inside two helical micro-fin tubes with outer diameter of 6.35 mm and helical angles of 18o and 28o respectively were experimentally studied at a high mass flux ranging from 500 to 1100 kg m−2 s−1. The condensation temperatures are 35°C, 40°C and 45°C, and the vapor qualities ranges from 0.95 to 1.00 at the inlet section and from 0.00 to 0.05 at the outlet section. Experimental results show that there are annular and intermittent flow regimes inside the tube under experimental conditions, the ratio of annular flow region to the total heat transfer region is about 70%. The liquid film flow changes from rotational flow to coexistence of rotational and horizontal flows when the vapor quality is 0.475±0.08, 0.486±0.06 and 0.521±0.05, respectively and the corresponding saturation temperature is 35°C, 40°C and 45°C. Based on the experimental data, the heat transfer coefficient increases with increasing mass flux and fin helical angle, and with decreasing saturation temperature and Reynolds number of cooling water. In addition, the heat transfer coefficient of annular flow is greater than that of intermittent flow, in other words, the heat transfer coefficient increases with increasing vapor quality. The heat transfer coefficient obtained at high mass flux was compared with the calculated data of some published correlations used at low mass flux. It was found that most correlations underestimate the experimental heat transfer coefficient inside the micro-fin tube, and these prediction deviation increases with increasing mass flux and fin helical angle. By introducing some dimensionless numbers as well as considering the flow mechanism of liquid film inside the tube, two heat transfer coefficient correlations were proposed based on the experimental data. The ratio of liquid film thickness to fin height was used to characterize whether the liquid film flow is rotational flow or coexistence of rotational and horizontal flows in the proposed correlation, which shows a better prediction accuracy with a mean deviation of less than 7.3%.

Experimental Research on the Flow Friction and Heat Transfer Performance in Titanium Alloy Twisted Tube

Experimental Research on Heat Transfer and Flow Resistance Properties in Spiral Twisted Tube Heat Exchanger

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Study on shell side heat transport enhancement of double tube heat exchangers by twisted oval tubes

Heat transfer of laminar oscillating flow in finned heat exchanger of pulse tube refrigerator

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Experimental Study of Condensation Heat Transfer of R134a Inside the Micro-Fin Tubes at High Mass Flux

Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment

Analysis of heat transfer characteristics and entransy evaluation of high viscosity fluid in a novel twisted tube

Experimental Study of Heat Transfer Enhancement for Molten Salt with Transversely Grooved Tube Heat Exchanger in Laminar-Transition-turbulent Regimes

Experimental Study on Convective Heat Transfer in Alternating Elliptical Axis Tubes

Influence of the twisting and nano fluids on performance of a triangular double tube heat exchanger

Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids

Experimental study on single-phase heat transfer performance of internal helically finned tubes covering low Reynolds number in turbulent flow

Experimental and numerical investigation on flow and heat transfer characteristics of a multi-waves internally spiral finned tube

Experimental investigation on effect of perforated double V-cut twisted tape on thermo-hydraulic characteristics of heat exchanger tube

Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles

Study on Simulation of Heat Transfer Tubes with Twisted-Tape Inserted

Study of ultrasonic influence on heat transfer and resistance performance of round tube with twisted belt

Experimental and numerical investigation of turbulent heat transfer enhancement of an intermediate heat exchanger using corrugated tubes

Turbulent flow and heat transfer in a new type of internally torsion-ribbed helical tube