Abstract:The authors attempt to explore the co‐excitation control method of both radial magnetic bearing (RMB) and switched reluctance motor (SRM) by using a set of asymmetric power converters together in order to reduce the controller cost of conventional magnetic levitation motor systems. A four‐degree‐of‐freedom magnetic bearing switched reluctance motor consisting of two 8‐pole RMBs and two two‐phase 4/2‐pole SRMs is built, and only needs eight asymmetrical half‐bridge power converters, reducing the number of power circuits by four. In traditional magnetic bearing motors, the magnetic bearing and the motor are usually driven and controlled separately, resulting in higher controller costs and limiting further expansion of their applications. The author presents a four‐degree‐of‐freedom (4DOF) magnetic bearing switched reluctance motor (MBSRM), consisting of two 8‐pole active radial magnetic bearings (RMBs) and two two‐phase 4/2‐pole switched reluctance motors (SRMs), driven simultaneously by a set of asymmetrical power converters together. Firstly, the structure, winding configuration and co‐excitation working principles of the 4DOF‐MBSRM system are described in detail. Then the radial force formula for an 8‐pole RMB and the torque mathematical model for a 4/2‐pole SRM are briefly derived based on equivalent magnetic circuits, respectively. Furthermore, a co‐excitation control strategy for the 4DOF MBSRM is developed wherein an instantaneous radial force is used to control its rotor shaft levitation, an instantaneous torque is employed for rotational control at low and medium speeds, and an average torque is used for high speed operation. Finally, the good performance of the co‐excitation control for the proposed 4DOF‐MBSRM is proved by simulation analysis.

Decoupling control of bearingless switched reluctance motors based on neural network inverse system

Torque Ripple Minimization in Switched Reluctance Motors Using Fuzzy-Neural Network Inverse Learning Control

Model Analysis and Control of Bearingless Switched Reluctance Motor

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Intelligent Decoupling Control Study of PMSM Based on the Neural Network Inverse System

Neural Network Control Of Electric Vehicle Based On Position-Sensorless Brushless Dc Motor

Simplified Model Study of Neural Network Inverse System for Permanent Magnet Synchronous Motors

Two-Degree-of-Freedom Control for Active Magnetic Bearing Flywheel Rotor System Based on Inverse System Decoupling

Single Neuron Network PI Control of High Reliability Linear Induction Motor for Maglev

Design and analysis on switched reluctance motor system using field-circuit coupled method

Feedforward Decoupling Control for Rigid Rotor System of Active Magnetically Suspended High‐speed Motors

Decoupling Control of Induction Motors Using Artificial Neural Networks

Direct Displacement Control of Rotor Eccentric for Bearingless Introduction Motor

Design of a Deflection Switched Reluctance Motor Control System Based on a Flexible Neural Network

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Decoupling Control for Active Magnetic Bearing High-speed Flywheel Rotor Based on Mode Separation and State Feedback

All-coefficient Adaptive Control of Active Magnetic Bearing System Based on Characteristic Model

Co‐excitation control of a four‐degree‐of‐freedom magnetic bearing switched reluctance motor based on mathematical models

Flexible Neural Network-Based Self-Regulation PID of Magnetic Bearing Force Control

Position Sensorless Control Based on Sliding Mode Observer for Multiphase Bearingless Motor with Single Set of Windings

Radial Suspending Inverse-System Method Control for Magnetic Suspending Switched Reluctance Motor