Abstract:It is difficult for the conventional single-stage compression auto-cascade refrigeration cycle to achieve higher refrigeration efficiency and lower refrigeration temperature, because the stream rich in high boiling point component from the phase separator bottom undergoes a single-stage compression process of high pressure lift ratio. Based on the concept of the evaporating temperature of the high/low boiling point component matching the grade compression of two streams from the phase separator, a component-based double-stage compression auto-cascade refrigeration (CDACR) cycle using R170/R600a is proposed in this paper. In the novel cycle, one dedicated compressor with two suction ports is used as the substitute for a conventional compressor with the sole suction port to realize grade compression process of the component of the refrigerant mixtures, and the stream enriched with high boiling point component from the separator bottom is sucked into the high-pressure suction port and undergoes the low-pressure-lift-ratio compression process, while the stream rich in low boiling point component from the separator top is sucked into the low-pressure suction port and executes the high-pressure-lift-ratio compression process, so as to cut down the compressor power consumption and obtain a lower refrigeration temperature. The mathematical model of the proposed cycle is developed to evaluate the thermodynamic performance of the system and comparisons with the conventional single-stage compression auto-cascade refrigeration (SCACR) cycle are also discussed. The results indicate that application of the component-based grade compression to the conventional auto-cascade refrigeration cycle dramatically improves the performance of the CDACR cycle, and there is optimum composition ratio of refrigerant mixtures for the CDACR cycle to obtain the highest coefficient of performance ( COP ). It is also shown that the performance of the CDACR cycle is significantly better than that of the SCACR cycle. As compared with those of the SCACR cycle, the compressor power consumption of the CDACR cycle decreases by 44.83%-53.17%, and its COP increases by 0.34–0.43, as the evaporating temperature at the evaporator outlet ranges from −60 °C to −40 °C. In addition, at the condenser outlet temperature in the range of 26 °C- 40 °C, the compressor power consumption for the proposed cycle is 37.74%-47.03% lower than that for the SCACR cycle, while COP of the CDACR cycle is 0.29–0.42 higher than that of the SCACR cycle.

Thermodynamic analysis of a cascade vapour compression refrigeration system integrated Linde-Hampson cycle

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Equivalent Cycle and Optimization of Auto-Cascade Absorption Refrigeration Systems

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

A Study On A New Auto-Cascade Refrigerating Cycle

Theoretical analysis of three CO2/C3H8 (R744-R290) cascade refrigeration systems with precooling processes in low-temperature circuits

Novel Design and Thermodynamic Analyses of Cascade Refrigeration System at Ultra-Low Temperature

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Proposal and performance study on a component-based double-stage compression auto-cascade refrigeration cycle

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Energy, Exergy, and Economic Analysis of Compression-Absorption Cascade Refrigeration Cycle Using Different Working Fluids

Proposal and thermodynamic analysis of an ejection-compression refrigeration cycle driven by low-grade heat

Thermodynamic Analysis on A Novel Gas-gas Ejector Enhanced Autocascade Refrigeration Cycle

Performance Evaluation and Cycle Time Optimization of Vapor-Compression/Adsorption Cascade Refrigeration Systems

Thermodynamic Analysis of Hybrid Two-Stage CO 2 Mechanical Compression–ejector Cooling Cycle

Thermo-economic analysis and multi-objective optimization of vapour cascade refrigeration system using different refrigerant combinations

Thermodynamic analysis of a novel multi-target-temperature cascade cycle for refrigeration

Energy And Exergy Analysis Of A Two-Stage Cascade Vapor Compression Refrigeration System With Modified System Configuration