Abstract:Natural rubber (NR) has a strategic position in the rubber industry due to its excellent properties, but it faces the problem of insufficient output and difficulty in recycling. Here, a high-performance elastomer was prepared by the simple epoxidation modification of bio-based Eucommia ulmoides gum (EUG). For the first time, it was found that epoxidized EUG (EEUG) with an epoxy degree of 12.3%–17.4% no longer crystallized at room temperature but had the ability to strain-induced crystallization (SIC). As a result, its vulcanizates showed excellent tensile strength (17 MPa), toughness (37.8 MJ m–3), and elasticity (strain recovery values >97%) without filler reinforcement, which is comparable with vulcanized NR. The SIC of EEUG was studied by synchrotron radiation wide-angle X-ray diffraction (SR-WAXD), and its performance was also compared with NR under the reinforcement of carbon black. In addition, through cross-linking by disulfide bonds, EEUG could be used to prepare high-performance (tensile strength of 10.5 MPa, toughness of 30.7 MJ m–3), recyclable green elastomers. This new kind of elastomer can be used as the second natural rubber, which is of great significance to solve the problem of insufficient production and difficult recovery of NR.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.macromol.1c02646.Vulcanization formula of EEUG-S and EEUG-DTSA; reaction formula of EEUG-DTSA; 1H NMR spectrum and DSC curves of EEUG; vulcanization curves and cyclic tensile–strain curves of EEUG-S and EEUG-DTSA; 1D WAXD patterns of EEUG-12.3%-S-1.5; 2D WAXD patterns, storage modulus, and loss modulus with temperature of F-EEUG-14.5%; FT-IR spectra of EEUG-DTSA before and after curing (PDF)This article has not yet been cited by other publications.

Relationship between crystallization behavior and properties of Eucommia ulmoides gum/natural rubber blends

Co-vulcanization of natural rubber and Eucommia ulmoides gum for mediation of the nonlinear rheology behaviors

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Constituent compatibility and physical properties of bio‐based EUG/EPDM blends

Development of nitrile rubber/eucommia ulmoides gum composites for controllable dynamic damping and sound absorption performance

A high toughness elastomer based on natural Eucommia ulmoides gum

Rheological Behavior and Nonisothermal Crystallization of Polypropylene/Epoxidized Natural Rubber Blends

Second Natural Rubber with Self-Reinforcing Effect Based on Strain-Induced Crystallization

Shape Memory Behavior of Natural Eucommia ulmoides Gum and Low-Density Polyethylene Blends with Two Response Temperatures

Study on the structural and properties of composite films prepared by blending EUL and NBRL

Microstructure Evolution and Strain Softening of Carbon Black Filled Natural Rubber Vulcanizates

Non-rubber components tuning mechanical properties of natural rubber from vulcanization kinetics

Modification of the Crumb Rubber Asphalt by Eucommia Ulmoides Gum under a High-Temperature Mixing Process

Influence of Curing Systems on Properties of HNBR/CR Blend

Study on the self-crosslinking behavior based on polychloroprene rubber and epoxidized natural rubber

Intumescent flame retardancy and smoke suppression of Eucommia ulmoides gum/natural rubber blends based on synergistic g-C 3 N 4 @Fe 3 O 4 nanocomposites

Effect of epoxy functionalized elastomer modified carbon fiber on mechanical properties and interfacial adhesion of chloroprene rubber (CR)/natural rubber (NR) composites

Effect of ionic liquid on structure and properties of carbon black filled natural rubber vulcanizates

Study on the phase structure and sound absorption properties of Eucommia ulmoides gum composites

Effect of non-rubber components on the crosslinking structure and thermo-oxidative degradation of natural rubber

Influence of amount of sulfur on crosslinking density and structure of natural rubber characterized by nuclear magnetic resonance spectroscopy