Abstract:In this paper, the seismic performance of a prefabricated frame structure with a local outsource steel tube bolted column–column connect is evaluated from the perspective of seismic vulnerability theory. Firstly, a simplified model of the prefabricated frame structure was constructed and validated by experiments. Then, a six-story prefabricated reinforced concrete frame structure (PRCS) and a cast-in-situ reinforced concrete frame structure (CRCS) were designed as examples to get the increment dynamic analysis (IDA) of the structure under 12 ground motions, and the two-parameter damage model was used as the structural requirement index. As a traditional structural requirement index-the maximum inter-storey drift angle cannot accurately describe the mechanism of structural damage. Therefore, two types of damage models are compared and analyzed. In addition, in order to evaluate the damage of frame structure effectively, a new damage index weighted combination method is proposed, and its feasibility is verified. Finally, the IDA curve and vulnerability curve with Kunnath two-parameter damage model and the maximum inter-story displacement angle as the requirement index are drawn. The results show that the two-parameter damage model is more accurate than the maximum inter-storey drift angle model in evaluating the seismic performance of the PRCS and CRCS. It shows that the maximum inter-story displacement angle model can overestimate the collapse resistance of the PRCS by 60.7% on average, and the collapse resistance of the CRCS by 75.67% on average. The seismic performance of the CRCS is better than that of the PRCS as the seismic intensity increases. Although the seismic performance of fabricated columns is similar to that of cast-in-place columns, there is still a certain gap in the seismic performance of frame structures.

Anti-collapse Performance of Out-Jacketing PSRC Frame for Adding Stories under Severe Earthquakes

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Collapse tests of RC frame with sudden middle column removal

Experimental Study of a Novel Multi-Hazard Resistant Prefabricated Concrete Frame Structure

Seismic vulnerability of prefabricated reinforced concrete frame structure based on local outsource steel tube bolted column–column connection

Shake Table Tests of Large-Scale Substandard RC Frames Retrofitted with CFRP Wraps Before Earthquakes

Analytical Model for Multi-Hazard Resilient Prefabricated Concrete Frame Considering Earthquake and Column Removal Scenarios

Seismic and progressive collapse potentials of low-rise soft-story RC frames and strengthening strategy *

Passive Control Reinforced Concrete Frame Mechanism with High Strength Reinforcements and Its Potential Benefits Against Earthquakes

Seismic performance investigation on self-centering friction frames: Collapse capacity and post-earthquake recovery

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Experimental Study of Novel Concrete Frames Considering Earthquake and Progressive Collapse

Study on the Strengthening Effect of A Typical Rc Frame in Wenchuan Earthquake with Attached Substructures

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Experimental and theoretical study of seismic and progressive collapse resilient composite frames

Numerical Investigation of Progressive Collapse Resistance of Reinforced Concrete Frames Subject to Column Removals from Different Stories

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Anti-collapse performance of concrete-filled steel tubular composite frame with RC shear walls under middle column removal

Behavior and design of reinforced concrete frames retrofitted with steel bracing against progressive collapse

Seismic Performance Evaluation of Novel RC Frame Structure with Kinked Rebar Beams and Post-Yield Hardening Columns Through Shaking Table Tests