Abstract:The hydrogen evolution reaction (HER) is an important phenomenon in water splitting. Consequently, the development of an active, earth-abundant, and inexpensive HER catalyst is highly desired. MoS 2 has drawn considerable interest as an HER catalyst because it is composed of non-precious metal and exhibits high catalytic activity in the nanosheet form. In this study, size-controlled MoS 2 particles were synthesized by ball milling. The as-prepared samples exhibited significantly enhanced electrochemical and catalytic properties compared to those of pristine bulk MoS 2 . Furthermore, the HER activity improved further upon the introduction of graphene into the as-prepared ball-milled samples. In particular, the MoS 2 sample ball-milled for 12 h mixed with graphene exhibited optimal performance, showing an overpotential (160 mV at 10 mA cm −2 ) that was ~ 335 mV lower than that of pristine bulk MoS 2 . The superior catalytic activity was ascribed to the exposed edge sites, sulfur vacancies, and 1T phase of MoS 2 , as well as the noteworthy fortifying effect of the electronically conductive flexible material, graphene. The results provide a promising strategy for its application as an efficient and stable HER catalyst. Li et al. reported MoS 2 -based electrocatalysts for the hydrogen evolution reaction. The superior catalytic activity was ascribed to exposed edge sites, sulfur vacancies, 1T phase, and the effect of graphene.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient and low - cost Hydrogen Evolution Reaction (HER) catalyst. Specifically, the researchers prepared size - controllable molybdenum disulfide (MoS₂) particles by ball - milling method and introduced graphene to enhance its electrocatalytic activity. This method aims to improve the catalytic performance of MoS₂ in the hydrogen evolution reaction, especially by increasing edge sites, forming 1T phase and creating sulfur vacancies. The experimental results show that the MoS₂ sample ball - milled for 12 hours and mixed with graphene exhibits the best catalytic performance, and its overpotential (160 mV at 10 mA cm⁻²) is about 335 mV lower than that of the original bulk MoS₂. In addition, the addition of graphene not only improves the electronic conductivity of the material, but also prevents the agglomeration of MoS₂ particles, thereby further enhancing the catalytic activity and stability. ### Main Objectives 1. **Improve Catalytic Activity**: Reduce the size of MoS₂ particles by ball - milling method and increase the exposed edge sites, so as to improve the HER catalytic activity. 2. **Introduce 1T Phase and Sulfur Vacancies**: The 1T phase and sulfur vacancies formed during the ball - milling process can be used as additional catalytically active sites to further improve the catalytic performance. 3. **Enhance Conductivity and Stability**: By introducing graphene, improve the electronic conductivity of the material and prevent particle agglomeration, so as to maintain good catalytic performance and stability. ### Experimental Methods - **Material Preparation**: Use a planetary ball mill to ball - mill MoS₂ for different times to prepare MoS₂ particles of different sizes. - **Characterization Techniques**: Characterize the samples by using techniques such as scanning electron microscopy (SEM), X - ray diffraction (XRD), and transmission electron microscopy (TEM). - **Electrochemical Testing**: Test the electrocatalytic performance of the samples by linear sweep voltammetry (LSV) and cyclic voltammetry (CV). ### Results - **Morphology and Structural Changes**: The size of MoS₂ particles after ball - milling is significantly reduced, and more edge sites and 1T phase are formed. - **Electrocatalytic Performance**: Ball - milling treatment significantly improves the HER catalytic activity of MoS₂, especially when graphene is introduced, the catalytic performance reaches the optimum. - **Stability and Conductivity**: The addition of graphene not only improves the conductivity of the material, but also enhances its stability in long - term electrochemical tests. ### Conclusion This study provides a simple and effective strategy. By ball - milling method and the introduction of graphene, the catalytic performance of MoS₂ in the hydrogen evolution reaction is significantly improved. This method is expected to achieve efficient and stable hydrogen production in future large - scale industrial applications.

Ball-milled MoS2 with graphene shows enhanced catalytic activity for hydrogen evolution reaction

Monolayer-precision Synthesis of Molybdenum Sulfide Nanoparticles and Their Nanoscale Size Effects in the Hydrogen Evolution Reaction.

Design of Dual-Modified MoS2 with Nanoporous Ni and Graphene as Efficient Catalysts for the Hydrogen Evolution Reaction

Insight into the Excellent Catalytic Activity of (como)s2/graphene for Hydrogen Evolution Reaction

MoS2 formed on mesoporous graphene as a highly active catalyst for hydrogen evolution

Facile one-pot supercritical synthesis of MoS2/pristine graphene nanohybrid as a highly active advanced electrocatalyst for hydrogen evolution reaction

A ternary hybrid of Zn-doped MoS2-RGO for highly effective electrocatalytic hydrogen evolution

MoS2 Nanoparticles Grown on Graphene: An Advanced Catalyst for Hydrogen Evolution Reaction

Gram-Scale Mechanochemical Synthesis of Atom-Layer MoS<sub>2</sub> Semiconductor Electrocatalyst via Functionalized Graphene Quantum Dots for Efficient Hydrogen Evolution

Space-Confined Growth of Mos2 Nanosheets Within Graphite: the Layered Hybrid of Mos2 and Graphene As an Active Catalyst for Hydrogen Evolution Reaction

Three-dimensionally hierarchical MoS2/graphene architecture for high-performance hydrogen evolution reaction

Growth of MoS2 nanosheets on M@N-doped carbon particles (M = Co, Fe or CoFe Alloy) as an efficient electrocatalyst toward hydrogen evolution reaction

Direct growth of cobalt-doped molybdenum disulfide on graphene nanohybrids through microwave irradiation with enhanced electrocatalytic properties for hydrogen evolution reaction

Ball-Milling Mos2/Carbon Black Hybrid Material for Catalyzing Hydrogen Evolution Reaction in Acidic Medium

Ball milling-engineered nanostructured MoSe 2 /graphite electrocatalyst: Achieving superior hydrogen evolution with a high density of active sites

Ultrathin molybdenum disulfide/carbon nitride nanosheets with abundant active sites for enhanced hydrogen evolution.

Epitaxial MoS2 Nanosheets on Nitrogen Doped Graphite Foam As a 3D Electrode for Highly Efficient Electrochemical Hydrogen Evolution

Atomic-Scale Intercalation of Graphene Layers into MoSe2 Nanoflower Sheets as a Highly Efficient Catalyst for Hydrogen Evolution Reaction

In Situ Thermal Synthesis of Inlaid Ultrathin Mos2/Graphene Nanosheets As Electrocatalysts for the Hydrogen Evolution Reaction

One-step Hydrothermal Synthesis of Few-Layered and Edge-Abundant MoS2/C Nanocomposites with Enhanced Electrocatalytic Performance for Hydrogen Evolution Reaction

Defective MoS2 Electrocatalyst for Highly Efficient Hydrogen Evolution Through a Simple Ball-Milling Method