Abstract:The purpose of this study was to prepare ginkgolide B (GB) lyophilized powder for injection with excellent appearance and stable quality through a formulation screening and by optimizing the freeze-drying process. Cremophor EL as a solubilizer, PEG 400 as a latent solvent, and mannitol as an excipient were mixed to increase the solubility of GB in water to more than 18 times (about from 2.5 × 10−4 mol/L (0.106 mg/mL) to 1.914 mg/mL). Formulation screening was conducted by orthogonal design where the content of GB in the solution before lyophilization (using external standard method of HPLC) and reconstitution time after lyophilization were the two evaluation indexes. The optimized formulations were GB in an amount of 2 mg/mL, Cremophor EL in an amount of 16% (v/v), PEG 400 in an amount of 9% (v/v), mannitol in an amount of 8% (w/v), and the solution pH of 6.5. Through four single-factor experiments (GB adding order, preparation temperature of GB solution, adding amount, and adsorption time of activated carbon), the preparation process of GB solution was confirmed. The glass transition temperature of maximally GB freeze-concentrated solution was − 17.6°C through the electric resistance method. GB lyophilized powder began to collapse at − 14.0°C, and the fully collapsed temperature was − 13.0°C, which were determined by freeze-drying microscope. When the collapse temperature was determined, the primary drying temperature was obtained. Thereby, the freeze-drying curve of GB lyophilized powder was initially identified. The freeze-drying process was optimized by orthogonal design, the qualified product appearance and residual moisture content were the two evaluation indexes. The optimized process parameters and process were (1) shelf temperature, decreased from room temperature to − 45.0°C, at 0.5°C/min in 2 h; (2) shelf temperature increased from − 45.0 to − 25.0°C, at 0.1°C/min, maintained for 3 h, and the chamber pressure was held at 10 Pa; (3) shelf temperature was increased from − 25.0 to − 15.0°C at 0.1 °C/min, maintained for 4 h, and the chamber pressure was held at 10 Pa; and (4) shelf temperature was increased from − 15.0 to 20.0°C at 1.0 °C/min, maintained for 4 h, and the chamber pressure was raised up to 80 Pa. In these lyophilization process conditions, the products complied with relevant provisions of the lyophilized powders for injection. Meanwhile, the reproducibility was satisfactory. Post-freezing annealing had no significantly beneficial effects on shortening the freeze-drying cycle and improving the quality of GB lyophilized powder.

Optimization of the preparation of multiple electrolytes injection containing sodium bicarbonate

Response Surface Methodology for the Optimization of Beta-Lactoglobulin Nano-Liposomes

Preparation of Starch Sulphate Using Concentrated Sulfuric Acid and Propanol

Determination of Critical Influencing Factor on Ph Stability of Yuxingcao Injection

Optimization of a Coupling Process for Insulin Degludec According to a Quality by Design (qbd) Paradigm

[Optimization of Lime Milk Precipitation Process of Lonicera Japonica Aqueous Extract Based on Quality by Design Concept].

Formulation Screening and Freeze-Drying Process Optimization of Ginkgolide B Lyophilized Powder for Injection

Study on the prescription and production process for the dobutamine hydrochloride glucose injection

Preparation and Quality Control of Ascorbic Acid and Sodium Chloride Injection

Optimization of Fermentation for Production Conditions of Antibiotic by Bacillus amyloliquefaciens D1

Optimized Process and Quality Evaluation for Ketamine Hydrochloride

Optimization of preparation technique for the Qiyuejiangzhi tablets

The Optimization of the Synthesis Process and the Identification of Levobupivacaine Hydrochloride

Preparation of Ethyl Cellulose Microspheres for Sustained Release of Sodium Bicarbonate.

Optimization of Fermentation Process, Extraction and Separation of Chaetoglobosin A

Optimization for the Ethanol Precipitation Process of Botanical Injection: Indicator Selection and Factor Influences

Study on the technology of sterilization water for injection in celine bottle

Improving the clarity and sensitization of polysorbate 80 by ultrasonic-assisted ultrafiltration technology

Optimization of formulation for the Qiyuejiangzhi tablets

Optimization of High-Concentration Endostatin Formulation: Harmonization of Excipients' Contributions on Colloidal and Conformational Stabilities.

Compatibility and Stability of Dexamethasone Sodium Phosphate Combined with Sodium Aescinate in Infusion Solutions