Abstract:A novel micro/nanoscale rough structured superhydrophilic hybrid-coated mesh that shows underwater superoleophobic behavior is fabricated by spray casting or dipping nanoparticle–polymer suspensions on stainless steel mesh substrates. Water droplets can spread over the mesh completely; meanwhile, oil droplets can roll off the mesh at low tilt angles without any penetration. Besides overcoming the oil-fouling problem of many superhydrophilic coatings, this superhydrophilic and underwater superoleophobic mesh can be used to separate oil and water. The simple method used here to prepare the organic–inorganic hybrid coatings successfully produced controllable micro-nano binary roughness and also achieved a rough topography of micro-nano binary structure by controlling the content of inorganic particles. The mechanism of oil–water separation by the superhydrophilic and superoleophobic membrane is rationalized by considering capillary mechanics. Tetraethyl orathosilicate (TEOS) as a base was used to prepare the nano-SiO2 solution as a nano-dopant through a sol-gel process, while polyvinyl alcohol (PVA) was used as the film binder and glutaraldehyde as the cross-linking agent; the mixture was dip-coated on the surface of 300-mesh stainless steel mesh to form superhydrophilic and underwater superoleophobic film. Properties of nano-SiO2 represented by infrared spectroscopy and surface topography of the film observed under scanning electron microscope (SEM) indicated that the film surface had a coarse micro–nano binary structure; the effect of nano-SiO2 doping amount on the film’s surface topography and the effect of such surface topography on hydrophilicity of the film were studied; contact angle of water on such surface was tested as 0° by the surface contact angle tester and spread quickly; the underwater contact angle to oil was 158°, showing superhydrophilic and underwater superoleophobic properties. The effect of the dosing amount of cross-linking agent to the waterproof swelling property and the permeate flux of the film were studied; the oil–water separation effect of the film to oil–water suspension and oil–water emulsion was studied too, and in both cases the separation efficiency reached 99%, which finally reduced the oil content to be lower than 50 mg/L. The effect of filtration times to permeate flux was studied, and it was found that the more hydrophilic the film was, the stronger the stain resistance would be, and the permeate flux would gradually decrease along with the increase of filtration times.

Multifunctional Oil-Water and Immiscible Organic Liquid Separation by Micropore Arrayed Ti Foil

Femtosecond Laser Ablated Durable Superhydrophobic PTFE Films with Micro-Through-holes for Oil/water Separation: Separating Oil from Water and Corrosive Solutions

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Development of superhydrophilic Al foil with micropore arrays via mask electrochemical machining and chemical immersion for efficient oil/water separation

Superwettability‐based Separation: from Oil/water Separation to Polymer/water Separation and Bubble/water Separation

Preparation of Underwater Superoleophobic Membranes Via TiO2 Electrostatic Self-Assembly for Separation of Stratified Oil/water Mixtures and Emulsions

A Facile Method to Fabricate Functionally Integrated Devices for Oil/water Separation.

Smart Superhydrophobic Filter Paper for Water/Oil Separation and Unidirectional Transportation of Liquid Droplet

Micro/Nanoscale Structured Superhydrophilic and Underwater Superoleophobic Hybrid-Coated Mesh for High-Efficiency Oil/Water Separation

Femtosecond Laser Ablated Durable Superhydrophobic PTFE Sheet for Oil/water Separation

Superhydrophobic PCTFE-based Microporous Membrane for Water/Oil Emulsion Separation in Various Environments

Metal-organic framework modified hydrophilic polyvinylidene fluoride porous membrane for efficient degerming selective oil/water emulsion separation

Mussel-inspired superhydrophilic membrane constructed on a hydrophilic polymer network for highly efficient oil/water separation

Laser-induced Stainless Steel Mesh for High Effective Water/oil Separation

Robust Photopolymerized Superoleophobic/Superhydrophilic Mesh for Oil-Water Separation

Multifunctional Ultrathin Aluminum Foil: Oil/Water Separation and Particle Filtration

Investigation of Oil–Water Separation on an F-SiO 2 /TiO 2 -Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation

Multi-functional TiO2-based Superoleophobic/Superhydrophilic Coating for Oil-water Separation and Oil Purification.

Investigation of Oil-Water Separation on an F-SiO2/TiO2-Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation.

"Double birds with one stone" strategy for oil/water separation based on foam Ni assembled by metal–organic framework

Synthesis of Vertically Aligned Composite Microcone Membrane Filter for Water/Oil Separation