Abstract:A frequency-modulated continuous-wave (FMCW) chirp generator serves as the pivotal building block for short-range 3D imaging radar systems, which have been widely utilized in medical and security applications. To enable quick and precise scanning with sub-millisecond snapshot duration and sub-centimeter depth resolution in a 79GHz large-scale MIMO radar imaging system, which composes of hundreds of TX/RX elements, the FMCW chirp generator must generate chirps with about $1 \mu s$ chirp duration and operate $\gt15$ GHz bandwidth (BW), necessitating an ultra-fast chirp slope exceeding 15GHz/$\mu s$. Meanwhile, high chirp linearity and low phase noise (PN) are also essential to improve the signal-to-noise ratio (SNR) for high-quality imaging, and the between-chirp idle time $(\mathrm{T}_{\mathrm{idle}})$ must be shortened to 50ns given that at least 95% of the chirp duty-cycle is required. To resolve the contradictions between narrow PLL BW for low PN and quick loop response for fast chirp, two-point-modulation (TPM) technique is widely implemented in fractional-N PLLs [1–5]. Regarding the linearity of an ultra-fast wideband chirp, it is challenging to effectively compensate for the residual frequency error $(\mathrm{F}_{\mathrm{error}})$ of a 1 st -order digital pre-distortion (DPD) [2–4] and the ramp non-linearity of a ramp tracker [1, 5] with an insufficient PLL bandwidth, calling for advanced curve fitting techniques. In this work, to diminish rms F <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">error</inf> in the context of ultra-fast wideband chirp generation, a ramp-tracker assisted 2 nd -order curve-fitting (2 nd -CF) DPD is proposed in a fractional-N sub-sampling (SS) PLL, achieving an 11GHz fast saw-tooth chirp with a 2.3GHz chirp bandwidth, 2.3GHz/$\mu s$ chirp slope, and 0.051% rms $\mathrm{F}_{\mathrm{error}}$. Leveraging an integral path in the digital loop filter (DLF), dynamic track-and-hold functionalities are realized in the voltage tracking loop (VTL) for robust LUT calibration. Advanced phase control is investigated in a DTC modulator to eliminate the fluctuation of the loop locking voltage during large frequency hopping $(\gt20$% of the center frequency f <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">center</inf> ), which further secures 50ns T <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">idle</inf> .

A DDS-Driven ADPLL Chirp Synthesizer with Ramp-Interpolating Linearization for FMCW Radar Application in 65nm CMOS

An Ultra-Wideband Low-Power ADPLL Chirp Synthesizer with Adaptive Loop Bandwidth in 65nm CMOS

A 90-98-ghz FMCW Radar Transceiver Supporting Broadband Modulation in 65nm CMOS

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

A 56 – 65 GHz Highly-Integrated FMCW Radar Transceiver with 7.8 Db NF and 8 GHz Chirp-Bandwidth in 65-Nm CMOS

A 54-67-ghz Low-Power Highly-Integrated Transceiver in 65-Nm CMOS for FMCW Radar Applications

A 24ghz Self-Calibrated Adpll-Based Fmcw Synthesizer With 0.01% Rms Frequency Error Under 3.2ghz Chirp Bandwidth And 320mhz/Mu S Slope

A 56.4-to-63.4 GHz Multi-Rate All-Digital Fractional-N PLL for FMCW Radar Applications in 65 nm CMOS

An 18.8-to-20.3-ghz Wide-Ramping-Range Cascaded- PLL-Based FMCW Generator with 44.1-Khz RMS Frequency Error and -105.6-dbc/hz Phase Noise in 40-Nm CMOS

10.7 An 11GHz 2nd-order DPD FMCW Chirp Generator with 0.051% rms Frequency Error under a 2.3GHz Chirp Bandwidth, 2.3GHz/μs Slope, and 50ns Idle Time in 65nm CMOS.

A Frequency Agile Synthesizer Using Dds And Pll Techniques For Fmcw Radar

A 12-Ghz Calibration-Free All-Digital PLL for FMCW Signal Generation with 78 MHz/μs Chirp Slope and High Chirp Linearity.

A High-Linear PLL-based FMCW Frequency Synthesizer with 42-Khz Rms FM Error and 1.2-Ghz Chirp Bandwidth

A K-Band Fmcw Frequency Synthesizer Using Q-Boosted Switched Inductor Vco In Sige Bicmos For 77 Ghz Radar Applications

A 24 GHz FMCW/Doppler Dual-Mode Frequency Synthesizer with 68.8 Khz RMS FM Error and 1.25 GHz Chirp Bandwidth

A 65 Nm 19.1-to-20.4 GHz Sigma-Delta Fractional-N Frequency Synthesizer with Two-Point Modulation for FMCW Radar Applications

Low Spurious Noise Frequency Synthesis Based on a DDS-driven Wideband PLL Architecture

Research of frequency synthesizer for Ka-band LFMCW radar application

DDS Based Radar Signal Generator for Microwave Remote Sensing

A Frequency Doubling Two-Path Phased-Array FMCW Radar Transceiver in 65nm CMOS

A 22.5–31.2-GHz Continuously Tuning Frequency Synthesizer With 8.7-GHz Chirp for FMCW Applications