Abstract Submitted for the DFD17 Meeting of The American Physical Society Anisotropic particles in highly turbulent Taylor-Couette flow1
D. Bakhuis,Ruben A. Verschoof,V. Mathai,CHAO SUN
2017-01-01
Abstract:Submitted for the DFD17 Meeting of The American Physical Society Anisotropic particles in highly turbulent Taylor-Couette flow1 DENNIS BAKHUIS, RUBEN A. VERSCHOOF, VARGHESE MATHAI, Univ of Twente, SANDER G. HUISMAN, ENS de Lyon, DETLEF LOHSE, Univ of Twente, CHAO SUN, Tsinghua University — In industry and nature, particle-laden turbulent flows consist mostly, if not always, of anisotropic particles. Examples of such flows are plankton distributions in the oceans, and pumping of concrete. In these flows, the suspended particles often distribute inhomogeneously, thereby affecting the drag and the flow properties significantly. Despite their widespread occurrence, a good understanding of how such particles affect the flow is still missing. Here we performed Particle Tracking Velocimetry and global torque measurements for a suspension of rigid fibers (or rods) in the Twente Turbulent Taylor-Couette facility. The fibers are density matched with the fluid, and we used particle volume fractions up to α = 2% of fibers with aspect ratio λ = L/d = 5, where L = 5 mm is the length and d = 1 mm the diameter. The global torque measurements were performed for Reynolds numbers up to 2.5 × 105 and showed similar values of drag reduction as was obtained for spherical particles (λ = 1). Using PTV we have extracted the orientation, the rotation rate, and the translation velocity and acceleration for the fibers. The fibers do not show a clear alignment with the main velocity gradient. We do, however, observe occasional large rotation rates for the fibers. 1This work is financially supported by Netherlands Organisation for Scientific Research (NWO) by VIDI grant number 13477. Dennis Bakhuis Univ of Twente Date submitted: 31 Jul 2017 Electronic form version 1.4