Abstract:Pulsed discharge in the vicinity of a multi-phase interface, where a discontinuity of physical properties exists, can be a joint problem of both electro- and thermo-physics. This study shows a comprehensive analysis of electric breakdown across an air-water interface and its successive multi-physical effects. The scenario is constructed via a pair of pin electrodes positioned on both sides of the interface, and the transient discharge is analyzed using high-speed backlight photography synchronized with electrical and optical diagnostics. It is observed that the corona/streamer develops from either side of the pin electrode. Electrostatic instability causes the interface to fluctuate and a water column to form above the interface. By increasing the applied voltage, discharge evolves from "dielectric barrier" mode (pin to interface) to "through breakdown" mode (pin to pin). Once the conductive channel bridges two electrodes, electric power of similar to 40 kW peak and deposited energy of 100 mJ will be injected into the channel and promote the "streamer-spark" transition, resulting in a crown-like splash (100 m s(-1)) near the interface and cavity formation. As the quenching of diffused plasmas, the over-expanded splash (5 mm in diameter) would be re-compressed by the ambient air. Particularly, the shrinkage of the thin water film of the splash can reach a 20 mm jet near the axis and develop Rayleigh-Taylor instability, along with the formation of micro-jets eruption during the convergent collision. More sophisticated interactions will appear at higher repetitive frequency (>100 Hz), where the perturbation caused by one pulse will influence the next, namely the "memory" effect. Furthermore, periodic loading on the interface effectively changes the cavity characteristics, showing an attractive prospect in fluid control applications.

Memory effect and statistical characterization of pulsed vacuum microdischarge breakdowns between palladium electrodes from 500 nm up to 10 μ m

Classification of vacuum arc breakdowns in a pulsed DC system

Pulsed Breakdown Behaviors across Microgaps at Various Atmospheres

Spatio-Temporal Dynamics Of Pulsed Gas Breakdown In Microgaps

Electrical and optical characterization of multi-hollow surface dielectric barrier discharge in configuration with the air-exposed electrode

Breakdown, Discharge Modes, and Gaseous Recovery of Atmospheric Air with Repetitive 10 Ns Pulses

Investigation on the Dynamic Process of Gas Breakdown Across Microgaps under Pulsed Voltage

Vacuum electrical breakdown conditioning study in a parallel plate electrode pulsed DC system

Prebreakdown investigations of vacuum discharge between nano gaps

Breakdown characteristics in pulsed-driven dielectric barrier discharges: influence of the pre-breakdown phase due to volume memory effects

In-situ Optical Observation of Dynamic Breakdown Process Across Microgaps at Atmospheric Pressure

Comparison of Electrode Effects in High-Pressure and Low-Pressure Gas Discharges Like Spark-Gap and Pseudo-Spark Switch

Pulse breakdown characteristics of microscale gap in micro-electro-mechanical system

Effect of dc voltage pulsing on high-vacuum electrical breakdowns near Cu surfaces

Repetitively Pulsed Gas Discharges: Memory Effect and Discharge Mode Transition

The Vacuum Flashover Characteristics Of Dielectrics Under Ns Pulse

Experimental Study of Nanosecond Pulsed Barrier Discharges in Air Manipulated by Pulse Width

Diagnosis of a short-pulse dielectric barrier discharge at atmospheric pressure in helium with hydrogen-methane admixtures

Impulse Discharge Method to Investigate the Influence of Gap Width on Discharge Characteristics in Micro-Edm

Electrical and Optical Properties of AC Microdischarges in Porous Ceramics

Breakdown and Interface Dynamics of Pulsed Discharge Plasma Across Air-Water Interface: from Single to Repetitive Stimulation