Abstract:Environmentally friendly lead-free dielectric ceramics have attracted wide attention because of their outstanding power density, rapid charge/dischargerate, and superior stability. Nevertheless, as a hot material in dielectric ceramic capacitors, the energy storage performance of Na0.5Bi0.5TiO3-based ceramics has been not satisfactory because of their higher remnant polarization value and low dielectric breakdown strength, which is a problem that must be urgently overcome. In this work, the (1 - x) (0.6Na0.5Bi0.5TiO3 - 0.4Sr0.7Bi0.2TiO3) - xBa(Mg1/3Ta2/3)O3 (BNST-xBMT) systems were designed based on a dual optimization strategy of domain and bandgap to solve the above problems. As a result, a record-breaking ultrahigh energy density and excellent efficiency (Wrec = 8.58 J/cm3, η = 93.5%) were obtained simultaneously under 565 kV/cm for the BNST-0.08BMT ceramic. The introduction of Sr0.7Bi0.2TiO3 induces the formation of nanodomains in BNT-based ceramics, leading to slim P-E curves, and the further modification of Mg/Ta reduces the grain sizes and increases the bandgap width, resulting in significant enhancement of the dielectric breakdown strength. Moreover, excellent stability and superior discharge performance (Wd = 4.7 J/cm3, E = 320 kV/cm) in the BNST-0.08BMT ceramic were also achieved. The results suggest that the BNST-0.08BMT ceramic shows potential applicability for dielectric energy storage ceramics. Simultaneously, the composition-design concept in the system provides a good reference for the further development of ceramic dielectric capacitors.

Combinatorial Optimization of Grain Size and Domain Morphology Boosts the Energy Storage Performance in (Bi 0.5 Na 0.5 )TiO 3 -Based Dielectric Ceramics

Combinatorial Optimization of Grain Size and Domain Morphology Boosts the Energy Storage Performance in (Bi0.5na0.5)tio3-Based Dielectric Ceramics.

Achieving High Pulse Charge–discharge Energy Storage Properties and Temperature Stability of (Ba0.98-Li0.02la )(mg0.04ti0.96)o3 Lead-Free Ceramics Via Bandgap and Defect Engineering

Realizing Ultrahigh Energy Storage Density in (Bi 0.5 Na 0.5 ) 0.94 Ba 0.06 TiO 3 -Based Ceramics via Manipulating the Domain Configuration and Grain Boundary Density

Improving Energy Storage Properties in (ba0.75sr0.1bi0.1)(ti0.9zr0.1)o3 Ceramic Thick Films by Adding (sb0.5li0.5)tio3, Domain Engineering and Defect Engineering

Realizing high energy density and efficiency simultaneously in (Bi0.5Na0.5)0.7Sr0.3TiO3-based ceramics via introducing linear dielectric CaTiO3

Optimization in the energy storage properties of Bi0.5Na0.5TiO3–SrTiO3 ceramics by introducing Bi(Mg0.5Zr0.5)O3

Aliovalent Doping Engineering to Synergistically Optimize the Energy Storage Properties of Sr0.7Bi0.2TiO3-based Linear-Like Relaxor Ferroelectric Ceramics

Enhanced energy storage performance in NBT-based MLCCs via cooperative optimization of polarization and grain alignment

Realizing Ultrahigh Energy Storage Density in (Bi0.5Na0.5)0.94Ba0.06TiO3-Based Ceramics via Manipulating the Domain Configuration and Grain Boundary Density

Superior energy storage capacity of a Bi 0.5 Na 0.5 TiO 3 -based dielectric capacitor under moderate electric field by constructing multiscale polymorphic domains

Achieved Excellent Energy Storage Performance under Moderate Electric Field in BaTiO3-modified Bi0.5Na0.5TiO3-based Lead-Free Ceramics Via Multiple Synergistic Design

Superior energy storage properties in SrTiO3‐based dielectric ceramics through all-scale hierarchical architecture

Optimized Energy Storage Performance in NaNbO3-based Ceramics Via Composition Modification and Micro-Structure Control

Composition and Structure Optimized BiFeO 3 ‐SrTiO 3 Lead‐Free Ceramics with Ultrahigh Energy Storage Performance

Optimized energy storage performance in (Ba0.8Sr0.2)TiO3-based ceramics via Bi(Zn0.5Hf0.5)O3-doping

Enhanced energy storage property achieved in Na0.5Bi0.5TiO3-based ferroelectric ceramics via composition design and grain size tuning

Ultrahigh Energy Storage Density and Efficiency in Bi 0.5 Na 0.5 TiO 3 -Based Ceramics via the Domain and Bandgap Engineering

Optimizing energy storage properties under moderate electric fields in Na0.5Bi0.5TiO3-based ceramics via configuration entropy modulation

Realizing ultrahigh breakdown strength and ultrafast discharge speed in novel barium titanate-based ceramics through multicomponent compounding strategy

Enhanced breakdown strength and excellent energy storage stability by B site hetero-valent doping in Sr0.7Bi0.2TiO3-based lead-free ceramic