Abstract:The paper presents the direct power control of doubly fed induction generator (DFIG) under unbalanced and harmonically distorted grid voltage in the stationary frame. Two alternative control targets, the balanced and sinusoidal stator current injected into the power grid, or the smooth DFIG electromagnetic torque to ensure reliable DFIG mechanic parts operation, can be achieved. The complicated and time-consuming grid voltage and stator current negative and harmonic components extraction, as well as power compensation item calculation according to the specific control targets, can be avoided in the proposed control strategy. Moreover, the proposed DPC strategy is implemented in stationary frame, thus no angle of grid voltage fundamental component by phase lock loop (PLL) is required. Therefore, the robustness against grid voltage unbalance and distortion disturbance and better dynamic response capability of the proposed strategy can be essentially ensured. The improved reduced order generalized integrator (ROGI) regulator is employed in stationary frame to regulate the ac signal of -50Hz (stator current negative component), -250Hz and +350Hz (stator current 5th and 7th harmonic component). On the other hand, the electromagnetic torque 100Hz and 300Hz pulsation is eliminated through the effective working of vector PI (VPI) regulators tuned at 100Hz and 300Hz. The availability of the proposed control strategy is validated by the simulation of MATLAB/Simulink.

Sensorless Control of Standalone Brushless Doubly Fed Induction Generator Feeding Unbalanced Loads in a Ship Shaft Power Generation System

Control of DFIG Wind Power System under Unbalanced Grid Voltage

Autonomous Operation Control Technique of DFIG Under Unbalanced Load

Decentralized Nonlinear Control of Wind Turbine with Doubly Fed Induction Generator

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Sharing of Unbalanced Loads in an Isolated Distributed Generation System with Droop Controlled Doubly Fed Induction Generator

Sensorless Control of Ship Shaft Stand-Alone BDFIGs Based on Reactive-Power MRAS Observer

Sensorless Voltage Control Schemes for Brushless Doubly-Fed Induction Generators in Stand-Alone and Grid-Connected Applications

Voltage regulation-based sensorless position observer with high-frequency signal injection topology for BDFIGs in ship power microgrid systems

Improved MRAS Observer and Sensorless Control of DFIG During Network Voltage Unbalance

Vector Control of a Doubly Fed Induction Generator for Stand-Alone Ship Shaft Generator Systems

Vector Control of the BDFG for Ship Shaft Standalone Power Generation System

Sensorless Operation Technique of Doubly-Fed Induction Generator Connected to DC Grid Through Two Full Controlled Converters

Enhanced Control of DFIG-used Back-to-back PWM VSC under Unbalanced Grid Voltage Conditions

An Improved Control Method for Standalone Brushless Doubly Fed Induction Generator Under Unbalanced and Nonlinear Loads Using Dual-Resonant Controller

Direct Power Control for Dfig under Unbalanced and Harmonically Distorted Grid Voltage in Stationary Frame

Unbalanced Voltage Compensation Strategy for Doubly Fed Induction Generator Based on Self-Synchronization Control Without Phase-Locked Loop

Multiple Target Implementation for A Doubly Fed Induction Generator Based on Direct Power Control under Unbalanced and Distorted Grid Voltage

Collaborative Control of DFIG System During Network Unbalance Using Reduced-Order Generalized Integrators

Direct Power Control of DFIG System Without Phase-Locked Loop under Unbalanced and Harmonically Distorted Voltage

Coordinated control strategy of DFIG for balanced currents and constant torque during grid voltage unbalance