Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Carbon fibres play a crucial role in fibre-reinforced composite materials. Properties of these composites are not solely determined by the fibre and matrix. In contrast, the interface between fibre and matrix also plays a pivotal role. The presence of sufficient van der Waals and hydrogen bonds between carbon fibre and matrix is vital for achieving strong interfacial adhesion during the composite fabrication. However, due to the chemical inertness and hydrophobic nature of carbon fibre surfaces, establishing effective interfacial bonding with the matrix poses a challenge. To address this, a range of methods has been developed to modify the carbon fibre surface and facilitate the formation of functional groups. Combined methods, such as sized carbon fibre and ozone treatment, have gained widespread usage in overcoming these challenges. In this study, a detailed examination was conducted to compare differences between ozonation of desized and sized carbon fibres by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Raman spectroscopy and scanning electron microscopy (SEM). XPS results distinctly demonstrated the transformation of epoxy groups into hydroxyl and carboxyl functional groups following the ozonation process. Notably, in the 60 min ozone treatment with 5 L/min (ozone-5), carboxyl groups increased from 1.27 to 8.12 %. In addition, in ozone-5 conditions, hydroxyl groups increased by 28.37 %. An escalation in graphite regions was also identified during the ozonation of the desized carbon fibre sample. Conversely, there was no significant alteration observed in the Raman value of sized carbon fibre samples. Furthermore, mechanical test results for both desized and sized carbon fibres after ozonation were compared. Ozone treatment of carbon fibres, regardless of whether sizing is present or not, leads to an increase in the interlaminar shear strength (ILSS). ILSS values for sized carbon fibres were initially 41 MPa. However, following ozone treatment, ILSS values of sized carbon fibres increased to 64 MPa. The tensile strength of sized carbon fibres increased from 772 to 831 MPa. This behaviour can be attributed to the increased amount of functional groups detected by XPS, Raman spectroscopy and the increase in roughness.

Surface Modification of Wool Fibers by Ecologically Ozone-Assisted Treatment

Effects of Oxygen Plasma Treatment on the Physical and Chemical Properties of Wool Fiber Surface

EFFECT OF WOOL SURFACE MODIFICATION ON WATER REPELLENT AND OIL REPELLENT FINISHINGS

FASCICLE OF TEXTILES , LEATHERWORK 13 FE-SEM COMPARATIVE STUDY ON SURFACE MODIFICATION OF WOOL FIBER AFTER DIFFERENT CHEMICAL TREATMENTS

Kinetic and Thermodynamic Analysis of Acid Dye Adsorption on UV/Ozone-Treated Wool Fabric

Investigation into the effect of UV/ozone treatments on the dyeability and printability of wool

Using an eco-friendly cold pad-batch reduction pretreatment to improve the whiteness, hydrophilicity, and anti-shrinkage of wool fabric

Influence of Fibre Surface Oxidation Treatment on Mechanical Interfacial Properties of Carbon Fibre/ Polyarylacetylene Composites

Application of Electron Paramagnetic Resonance Spectroscopy, Fourier Transform Infrared Spectroscopy-Attenuated Total Reflectance and Scanning Electron Microscopy to the Study of the Photo-Oxidation of Wool Fiber

Developing Super-Hydrophobic and Abrasion-Resistant Wool Fabrics Using Low-Pressure Hexafluoroethane Plasma Treatment

A Biological Treatment Technique for Wool Textile

Investigation into the Synergistic Effect Between Uv/Ozone Exposure and Peroxide Pad-Batch Bleaching on the Printability of Wool

Uniform Modification of Carbon Fibers Surface in 3-D Fabrics Using Intermittent Electrochemical Treatment

A controlled, highly effective and sustainable approach to the surface performance improvement of wool fibers

Study on the Effect of Permonosulphate Pretreatment Combined with Enzyme Treatment on Wool Fabric Properties and the Mechanism

Environmentally Friendly Surface Treatment of Wool Fiber with Plasma and Chitosan for Improved Coloration with Cochineal and Safflower Natural Dyes

Combined Cutinase and Keratinolytic Enzyme to Endow Improved Shrink-resistance to Wool Fabric

The Influence of Chemical Treatment on the Properties of Wool

The Effect of Oxidation Treatment with Supercritical Water/Hydrogen Peroxide System on Intersurface Performance for Polyacrylonitrile-Based Carbon Fibers

The Effect of Oxidation Treatment by KClO3/H2SO4 System on Intersurface Performance of Carbon Fibers

Influence of surface modifications on interfacial and mechanical properties in fibre-reinforced composites