Abstract:ABSTRACT: Casing deformation is a key issue that limits the efficient development of shale gas in the Sichuan Basin, southwest China. In recent years, although the internal and external factors of casing deformation have been identified, the interaction mechanism between the internal and external factors has always been the bottleneck restricting the effective implementation of casing deformation prevention strategies. Therefore, firstly, high-resolution seismic data are used to identify potential faults/fractures and analyze the distribution characteristics of fault/fractures; Secondly, the rock mechanics and in-situ stress parameters are quantitatively obtained by using field multi-source data, and a three-dimensional geomechanical model is established to clarify the distribution characteristics of regional in-situ stress; Then, Based on the mechanical conditions of fault/fracture activation, the assessment method of fault/fracture slip risk based on geomechanics is established by using the Monte Carlo method considering the uncertainty of fault/fracture occurrence, in-situ stress, and other influencing parameters; Finally, taking the area of Ning X well as an example, the new method is used to quantitatively evaluate the fault/fracture slip risk. Meanwhile, the evaluation results and the prediction results based on fault/fracture and in-situ stress distribution are separately compared with the actual casing deformation position. The results show that the coincidence between the assessment results of fault/fracture slip risk based on geomechanics and the actual casing deformation position is more than 85%, while the prediction results are based on fault/fracture and in-situ stress distribution characteristics are less than 80%. The research results are helpful to clarify the interaction mechanism between internal and external causes of casing deformation, which can provide a reference for the field-targeted implementation of casing deformation prevention strategies. 1. INTRODUCTION During the development of the Changning-Weiyuan National Shale Gas Demonstration Area in the Sichuan Basin, many shale gas wells experienced serious casing deformation(Chen, 2017a; Zhai et al., 2019). By the end of 2018, 113 wells have been fractured in the Changning block, 39 wells of which occurred casing deformation, accounting for 34.5%. As of October 2018, there are 36 casing deformation wells in the Weiyuan block, among 74 wells that have been fractured, accounting for 48.6%. By the end of 2020, the casing deformation ratio of deep shale gas wells in southern Sichuan is 30.77%(Huang et al., 2020). At present, casing deformation is a key engineering challenge that needs to be resolved urgently in the Changning-Weiyuan block. It not only increases the loss of the fracturing section reducing the production of a single well but also easily leads to well integrity problems shortening the life cycle of the wellbore, which seriously restricts the efficient development of shale gas.

Analysis of casing deformation failure mechanism based on fault slip

Numerical investigation of casing shear deformation due to fracture/fault slip during hydraulic fracturing

Investigation on dynamic mechanism of fault slip and casing deformation during multi-fracturing in shale gas wells

Mechanism Analysis and Potential Solutions for Casing Deformation of Shale GAS Fracturing Wells in Sichuan Basin

Casing deformation mechanisms of horizontal wells in Weirong shale gas field during multistage hydraulic fracturing

A study on governance method of casing shear deformation in shale gas well

Laboratory study on casing deformation during multistage horizontal well fracturing in shale gas development and strain based casing design

Mechanism Analysis and Numerical Simulation of Casing Failure in Hydraulic Fracturing of Shale Gas Formation

Experimental study on shear deformation mechanism and mitigation in shale gas casing

A novel investigation on casing deformation during hydraulic fracturing in the Weirong shale gas field, Sichuan basin, China

Analysis of Influencing Factors of Slippage and the Dynamic Process of Fault Slip Caused by Multi-Stage Fracturing

Research on the influence of strike-slip fault slippage on production casing and control methods and engineering application during multistage fracturing in deep shale gas wells

Study on a new method of controlling casing shear deformation based on hollow glass microspheres cement sheath

Quantitative Evaluation Method and Application of Fault/Fracture Slip Risk Based on Geomechanics

Research on casing deformation mechanism and prevention measures based on micro-seismic signal distribution

Investigation of casing deformation characteristics under cycling loads and the effect on casing strength based on full-scale equipment

Numerical Modeling and Cementing Countermeasure Analysis of Casing Shear Damage in Shale Reservoir

Influencing factors and prevention measures of casing deformation in deep shale gas wells in Luzhou block, southern Sichuan Basin, SW China

Mechanism and numerical simulation of a new device of bypass cementing device for controlling casing shear deformation induced by fault slipping

Research on the Failure Analysis and Prediction Method of Casing Deformation Under the Synergistic Effect of Sand Production and Corrosion

Quantitative Study on the Anticollapse Ability of Casing in Shale Gas Wells under Complex Load Conditions