Abstract:The combination of visual and inertial sensors for state estimation has recently found wide echo in the robotics community, especially in the aerial robotics field, due to the lightweight and complementary characteristics of the sensors data. However, most state estimation systems based on visual-inertial sensing suffer from severe processor requirements, which in many cases make them impractical. In this paper, we propose a simple, low-cost and high rate method for state estimation enabling autonomous flight of micro aerial vehicles, which presents a low computational burden. The proposed state estimator fuses observations from an inertial measurement unit, an optical flow smart camera and a time-of-flight range sensor. The smart camera provides optical flow measurements up to a rate of 200 Hz, avoiding the computational bottleneck to the main processor produced by all image processing requirements. To the best of our knowledge, this is the first example of extending the use of these smart cameras from hovering-like motions to odometry estimation, producing estimates that are usable during flight times of several minutes. In order to validate and defend the simplest algorithmic solution, we investigate the performances of two Kalman filters, in the extended and error-state flavors, alongside with a large number of algorithm modifications defended in earlier literature on visual-inertial odometry, showing that their impact on filter performance is minimal. To close the control loop, a non-linear controller operating in the special Euclidean group SE(3) is able to drive, based on the estimated vehicle’s state, a quadrotor platform in 3D space guaranteeing the asymptotic stability of 3D position and heading. All the estimation and control tasks are solved on board and in real time on a limited computational unit. The proposed approach is validated through simulations and experimental results, which include comparisons with ground-truth data provided by a motion capture system. For the benefit of the community, we make the source code public.

Visual–inertial Estimation of Velocity for Multicopters Based on Vision Motion Constraint

Metric Sensing and Control of a Quadrotor Using a Homography-Based Visual Inertial Fusion Method.

A Homography-Based Visual Inertial Fusion Method for Robust Sensing of a Micro Aerial Vehicle

Sensing and Control of a Quadrotor Using a Visual Inertial Fusion Method

VID-Fusion: Robust Visual-Inertial-Dynamics Odometry for Accurate External Force Estimation

Inertial-aided State and Slope Estimation Using a Monocular Camera

The Visual-Inertial-Dynamical Multirotor Dataset

A Monocular Odometer for a Quadrotor Using a Homography Model and Inertial Cues

Inertial-Aided Metric States and Surface Normal Estimation Using a Monocular Camera.

Surgical glove perforation in dermatologic surgery.

Cascaded Motion Estimation for Intelligent Vehicles in GNSS-Denied Scenes

Autonomous navigation of micro aerial vehicles using high-rate and low-cost sensors

Direct Visual-Inertial Ego-Motion Estimation via Iterated Extended Kalman Filter

A Position Estimation and Control System for the Quadrotor in GPS-Deny Situation Based on FAST Detection and Optical Flow

Invariant Observer-Based State Estimation for Micro-Aerial Vehicles in GPS-Denied Indoor Environments Using an RGB-D Camera and MEMS Inertial Sensors.

Multi-Aperture Visual Velocity Measurement Method Based on Biomimetic Compound-Eye for UAVs

The Motion Estimation of Unmanned Aerial Vehicle Axial Velocity Using Blurred Images

DIVE: Deep Inertial-Only Velocity Aided Estimation for Quadrotors

A Sensor Fusion Approach to Observe Quadrotor Velocity

A Novel Method for Measuring Center-Axis Velocity of Unmanned Aerial Vehicles Through Synthetic Motion Blur Images

Synthetic Velocity Measurement Algorithm of Monocular Vision Based on Square-Root Cubature Kalman Filter