Abstract:Event-based sensors have the potential to optimize energy consumption at every stage in the signal processing pipeline, including data acquisition, transmission, processing and storage. However, almost all state-of-the-art systems are still built upon the classical Nyquist-based periodic signal acquisition. In this work, we design and validate the Polygonal Approximation Sampler (PAS), a novel circuit to implement a general-purpose event-based sampler using a polygonal approximation algorithm as the underlying sampling trigger. The circuit can be dynamically reconfigured to produce a coarse or a detailed reconstruction of the analog input, by adjusting the error threshold of the approximation. The proposed circuit is designed at the Register Transfer Level and processes each input sample received from the ADC in a single clock cycle. The PAS has been tested with three different types of archetypal signals captured by wearable devices (electrocardiogram, accelerometer and respiration data) and compared with a standard periodic ADC. These tests show that single-channel signals, with slow variations and constant segments (like the used single-lead ECG and the respiration signals) take great advantage from the used sampling technique, reducing the amount of data used up to 99% without significant performance degradation. At the same time, multi-channel signals (like the six-dimensional accelerometer signal) can still benefit from the designed circuit, achieving a reduction factor up to 80% with minor performance degradation. These results open the door to new types of wearable sensors with reduced size and higher battery lifetime.

Event-driven Analog-to-digital Converter for Ultra Low Power Wearable Wireless Biomedical Sensors

A Low Power Level-Crossing ADC for Wearable Wireless ECG Sensors.

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A Review on Direct Digital Conversion Techniques for Biomedical Signal Acquisition

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

A 300-mV 220-nW event-driven ADC with real-time QRS detection for wearable ECG sensors

A Low Power Cyclic ADC Design for a Wireless Monitoring System for Orthopedic Implants

Design of Ultra-Low-Power Electrocardiography Sensors

An Error-Based Approximation Sensing Circuit for Event-Triggered, Low Power Wearable Sensors

A 1.2 V 600 Nw 12-Bit 2 Ks/s Incremental ADC for Biosensor Application

Power Efficiency Comparison of Event-Driven and Fixed-Rate Signal Conversion and Compression for Biomedical Applications

A Code-Recombination Algorithm-Based ADC with Feature Extraction for WBSN Applications

Approach to weak signal detection via over-sampling and bidirectional saw-tooth shaped function in wearable devices

A 62.2db SNDR Event-Driven Level-Crossing ADC with SAR-Assisted Delay Compensation Loop for Time-Sparse Biomedical Signal Acquisition.

A Low-Power SAR ADC with Capacitor-Splitting Energy-Efficient Switching Scheme for Wearable Biosensor Applications

Design of an Ultra-Low Power SAR ADC for Biomedical Applications

An ultra-low-power extended counting ADC For large scale sensor arrays

A 10-bit SAR ADC using novel LSB-first successive approximation for reduced bitcycles

A 61-nW Level-Crossing ADC With Adaptive Sampling for Biomedical Applications

Towards Low-power Wearable Wireless Sensors for Molecular Biomarker and Physiological Signal Monitoring

Wireless Wearable ECG Sensor Design Based on Level-Crossing Sampling and Linear Interpolation.