Nanoscale Pore Structure Characteristics of Deep Coalbed Methane Reservoirs and Its Influence on CH₄ Adsorption in the Linxing Area, Eastern Ordos Basin, China.
Shihu Zhao,Xiang Wu,X. Ni,Xiangdong Gao,Yanbin Wang,Yong Li
DOI: https://doi.org/10.1166/jnn.2021.18444
2021-01-01
Journal of Nanoscience and Nanotechnology
Abstract:The high gas content of deep coal seams is a driving force for the exploration and development of deep coalbed methane (CBM). The nanoscale pores, which are the main spaces for adsorption and storage of CBM, are closely related to the burial depth. Based on integrated approaches of vitrinite reflectance (Ro), maceral composition, scanning electron microscope (SEM), proximate analysis, fluid inclusion test, low-temperature N₂ adsorption-desorption, and CH₄ isothermal adsorption, the nanoscale pore structure of coals recovered at depths from 650 to 2078 m was determined, and its influence on the CH₄ adsorption capacity was discussed. The results show that the coal rank has a good linear relationship with the current burial depth of the coal seams; that is, the influences of the burial depth on the coals can be reflected by the influences of the coal rank on the coals. With the increase in the coal rank, the moisture and volatile content decrease, and the fixed carbon content increases. The variation in the pore volume and specific surface area with the increase in the coal rank can be divided into two stages: the rapid decline stage (when 0.75%<Ro < 1.0%), dominated by the compaction and gelatinization, and the slow decline stage (when 1.0%<Ro < 1.35%), characterized by the low stress sensitivity and the mass production of secondary pores. The percentage of micropores increases throughout the process. When 10 nm is taken as the boundary, the nanoscale pores show different fractal features. When Ro < 1.0%, the fractal dimension (FD) of the micropores is close to 3. When Ro > 1.0%, the FD of the micropores is close to 2. This indicates that with the increase in the degree of coalification, the surface of the micropores is simpler. The above results show that the gas adsorption capacity of coal first slightly decreases (when 0.75% < Ro < 1.0%) and then increases (when 1.0% < Ro < 1.35%), and the coincident results are shown in the Langmuir volume (VL) test results.
Geology,Medicine,Environmental Science,Materials Science