Abstract:The uniaxial compressive tests at different temperatures (223–298 K) and strain rates (\(0.40\mbox{--}63~\mbox{s}^{-1}\)) are reported to study the properties of hydroxyl-terminated polybutadiene (HTPB) propellant at intermediate strain rates, using a new INSTRON testing machine. The experimental results indicate that the compressive properties (mechanical properties and damage) of HTPB propellant are remarkably affected by temperature and strain rate and display significant nonlinear material behaviors at large strains under all the test conditions. Continuously decreasing temperature and increasing strain rate, the characteristics of stress-strain curves and damage for HTPB propellant are more complex and are significantly different from that at room temperature or at lower strain rates. A new constitutive model was developed to describe the compressive behaviors of HTPB propellant at room temperature and intermediate strain rates by simply coupling the effect of strain rate into the conventional hyperelastic model. Based on the compressive behaviors of HTPB propellant and the nonlinear viscoelastic constitutive theories, a new thermovisco-hyperelastic constitutive model with damage was proposed to predict the stress responses of the propellant at low temperatures and intermediate strain rates. In this new model, the damage is related to the viscoelastic properties of the propellant. Meanwhile, the effect of temperature on the hyperelastic properties, viscoelastic properties and damage are all considered by the macroscopical method. The constitutive parameters in the proposed constitutive models were identified by the genetic algorithm (GA)-based optimization method. By comparing the predicted and experimental results, it can be found that the developed constitutive models can correctly describe the uniaxial compressive behaviors of HTPB propellant at intermediate strain rates and different temperatures.

Finite Element Implementation of a Thermo-Damage-viscoelastic Constitutive Model for Hydroxyl-Terminated Polybutadiene Composite Propellant

Thermo-damage-viscoelastic Constitutive Model of HTPB Composite Propellant

A Thermovisco-Hyperelastic Constitutive Model of HTPB Propellant with Damage at Intermediate Strain Rates

Damage softening constitutive model of HTPB propellant for biaxial loading

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

Crack propagation velocity and fracture toughness of hydroxyl-terminated polybutadiene propellants with consideration of a thermo-viscoelastic constitutive model: Experimental and numerical study

Viscoelastic Constitutive Modeling of Solid Propellant with Damage

A nonlinear viscoelastic constitutive model for cyclically loaded solid composite propellant

A Viscoelastic Constitutive Model Considering Deformation and Environmental-Induced Damages for Solid Propellants

Research on the statistical damage constitutive model for composite solid propellant

Simulation of Mechanical Properties of HTPB‐based Propellant by a Viscoelastic Spring Lattice Model

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

A Strain-Rate-Dependent Hyperelastic Constitutive Model for Tensile Mechanical Behaviour of HTPB Propellant

Finite Element Analysis of a Modified Progressive Damage Model for Composite Laminates under Low-Velocity Impact

Research on the viscoelastic constitutive model of HTPB propellant over a wide range of strain rates

Visco-hyperelastic constitutive modeling of the dynamic mechanical behavior of HTPB casting explosive and its polymer binder

Nonlinear Constitutive Relation of HTPB Propellant Based on the First Law of Thermodynamics

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

Mechanical properties and deformation behaviors of the hydroxyl-terminated polybutadiene and ammonium perchlorate interface by molecular dynamics simulation

Enhancements on A Micromechanical Constitutive Model of Solid Propellant

Multiscale Viscoelastic Constitutive Modeling of Solid Propellants Subjected to Large Deformation