Abstract:A series of mesoporous nanocrystalline Ce-Zr solid solutions with different Ce/Zr ratios were successfully synthesized by the evaporation-induced self-assembly strategy, and were employed as catalytic supports of CuO-based catalysts for CO oxidation. These supports and catalysts were systematically characterized by X-ray powder diffraction (XRD), N-2 physisorption, transmission electron microscopy (TEM), energy-dispersed spectroscopy (EDS) mapping, X-ray photoelectron spectroscopy (XPS), H-2 temperature programmed reduction (H2-TPR), CO2 temperature programmed desorption (CO2-TPD), etc. The catalytic performances toward CO oxidation had been carefully evaluated over these CuO-based catalysts. The effects of various influencing factors, such as the Ce/Zr ratio, mesostructure, redox properties of the support, CuO loading amount and calcination temperature, on the low-temperature catalytic activity had been carefully investigated. The results showed that the catalyst supported on the support with a Ce/Zr ratio of 80/20 exhibited the highest catalytic activity. It was also found that the Ce-Zr solid solution mesoporous catalysts exhibited much higher catalytic activity than the counterparts without evident mesostructure, demonstrating the advantages of the mesoporous catalysts by providing more accessible catalytically active sites. Besides, the mesoporous Ce-Zr solid solution-supported catalysts with excellent redox properties displayed much better catalytic performances than the commercial gamma-Al2O3-supported catalyst. The kinetic study also indicated that the apparent activation energy of the CO oxidation process was greatly affected by the Ce/Zr ratio, mesostructure, and redox properties of the support. Overall, the present CuO-based catalysts with mesoporous nanocrystalline Ce-Zr solid solutions as supports were considered as a series of promising catalysts for CO oxidation.

The support effect on PdO/Ce 0.7 Zr 0.3 Ba 0.1 O 2.1 and CuO/Ce 0.7 Zr 0.3 Ba 0.1 O 2.1 catalysts

The Support Effect on Pdo/Ce0.7zr0.3ba0.1o2.1 and Cuo/Ce0.7zr0.3ba0.1o2.1 Catalysts

Effect of Ce/Zr Atomic Ratio on the TWC Properties of PdO/CexZr1-xO2(x=0-1.0) Catalysts

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Effect of Support on CO Oxidation Performance over the Pd/CeO2 and Pd/CeO2 Zro2 Catalyst

Effect of the Support on the CO Oxidation Activity of Supported PdO Catalysts

Preparation of Ce0.67Zr0.33O2 mixed oxides as supports of improved Pd-only three-way catalysts

Probing BaO Doping Effect on the Structure and Catalytic Performance of Pd/CexZr1–xO2 (x = 0.2–0.8) Catalysts for Automobile Emission Control

Enhanced Low-Temperature CO Oxidation Activity Through Crystal Facet Engineering of Pd/CeO2 Catalysts

Preparation and characterization of Ce0.57Zr0.33O2 and the activity of its supported only-pd three-way catalysts

Characterization study of CeO2 supported Pd catalyst for low-temperature carbon monoxide oxidation

Preparation and Characterization of Ce_(0.67)Zr_(0.33)O_2 and the Activity of Its Supported Only-Pd Three-Way Catalysts

Elucidation of Ce/Zr ratio effects on the physical properties and catalytic performance of CuOx/CeyZr1-yO2 catalysts

Facilely fabricating mesoporous nanocrystalline Ce–Zr solid solution supported CuO-based catalysts with advanced low-temperature activity toward CO oxidation

Preparation and Characterization of Ce0.67Zr0.33O2 and the Activity of Its Supported Only-Pd Three-Way Catalysts

Preparation of ceria-zirconia by modified coprecipitation method and its supported Pd-only three-way catalyst

Influence of WO3 Monolayer Modification on the Properties of Ce Zr1−O2-supporting CuO Catalysts

Influence of Different Subsistence States of CeO2-ZrO2 Mixed Oxides in Catalyst Coating on Catalytic Properties

Study of Ce 0.7 Sn 0.3 O 2 supported PdO catalysts for CO oxidation

The catalytic activity for CO oxidation of CuO supported on Ce0.8Zr0.2O2 prepared via citrate method

Redox Behavior of Active PdOx Species on (ce,zr)xo2–al2o3 Mixed Oxides and Its Influence on the Three-Way Catalytic Performance