Abstract:Background: Fe80B20 amorphous alloys exhibit excellent soft magnetic properties, high abrasive resistance and outstanding corrosion resistance. In this work, Fe80B20 amorphous micro-fibers with HC of 3.33 Oe were firstly fabricated and the effects of annealing temperature on the structure and magnetic properties of the fibers were investigated. Methods: In this study, Fe80B20 amorphous fibers were prepared by the single roller melt-spinning method. The structures of as-spun and annealed fibers were investigated by X-ray diffractometer (XRD) (PANalytical X,Pert Power) using Cu Kα radiation. The morphology of the fibers was observed by scanning electron microscopy (SEM) (HITACHI-S4800). Differential scanning calorimetry (DSC) measurements of the fibers were performed on Mettler Toledo TGA/DSC1 device under N2 protection. Vibrating sample magnetometer (VSM, Versalab) was used to examine the magnetic properties of the fibers. The resonance behavior of the fibers was characterized by an impedance analyzer (Agilent 4294A) with a home-made copper coil. Results: The X-ray diffusion (XRD) patterns show that the fibers remain amorphous structure until the annealing temperature reaches 500°C. The differential scanning calorimetry (DSC) results show that the crystallization temperature of the fibers is 449°C. The crystallization activation energy is calculated to be 221 kJ/mol using Kissinger formula. The scanning electron microscopy (SEM) images show that a few dendrites appear at the fiber surface after annealing. The result indicates that the coercivity HC (//) and HC (⊥) slightly increases with increasing annealing temperature until 400°C, and then dramatically increases with further increasing annealing temperature which is due to significant increase in magneto-crystalline anisotropy and magneto-elastic anisotropy. The Q value firstly increases slightly when the annealing temperature rises from room temperature (RT) to 300°C, then decreases until 400°C. Eventually, the value of Q increases to ~2000 at annealing temperature of 500°C. Conclusions: In this study, Fe80B20 amorphous fibers with the diameter of 60 μm were prepared by the single roller melt-spinning method and annealed at 200°C, 300°C, 400°C, and 500°C, respectively. XRD results indicate that the fiber structure remains amorphous when the annealing temperature is below 400°C. α-Fe phase and Fe3B phase appear when the annealing temperature rises to 500°C, which is above the crystallization temperature of 449°C. The recrystallization activation energy is calculated to be 221 kJ/mol. The coercivity increases with increasing annealing temperature, which attributes to the increase of total anisotropy. All the as-spun and annealed fibers exhibit good resonance behavior for magnetostrictive sensors.

Effect of Elevated Annealing Temperature on Electrical Conductivity and Magnetic Properties of Iron Phthalocyanine Polymer

Effect of Elevated Annealing Temperature on the Morphology, Microstructure, Conductivity and Microwave Absorption Properties of Phthalocyanine Polymer

Effect of Thermal Annealing on the Electrical Conductivity of Copper-Tin Polymer Composites.

Effect of Annealing Temperature on Permeability and Giant Magneto-Impedance of Fe-based Amorphous Ribbon

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

Preparation and characterization of iron phthalocyanine polymer magnetic materials

Temperature dependent electrical conductivity and microwave absorption properties of composites based on multi-wall carbon nanotubes and phthalocyanine polymer

Effect of Annealing on the Magnetostatic and Microwave Electromagnetic Properties of Glass-Coated Fe-Rich Microwires

Effect of annealing temperature on magnetic properties and corrosion resistance of Fe75.8Si12B8Nb2.6Cu0.6P1 alloy

Effects of Annealing on the Structure and Magnetic Properties of Fe27co23pb50 Nanowire Arrays

Effects of annealing on the structure and magnetic properties of Fe80B20 magnetostrictive fibers

Influence of annealing temperature on magnetic properties of InFeP prepared by ion implantation

Effect of annealing on the molecular ordering and crystal structure of Iron Phthalocyanine thin films on Si (111) surface

Improving the degradation and magnetization performance of FePC amorphous alloys by annealing treatment

Enhancing the Properties of FeSiBCr Amorphous Soft Magnetic Composites by Annealing Treatments

Influence of Annealing Temperature on Microstructure and Magnetic Properties of FeSiNbCuBP Amorphous Alloys

Tailoring the Magnetic and Hyperthermic Properties of Biphase Iron Oxide Nanocubes through Post-Annealing

Tailoring magnetic and hyperthermia properties of biphase iron oxide nanocubes through post-annealing

Effect of annealing temperatures on the electrical conductivity and dielectric properties of Ni1.5Fe1.5O4 spinel ferrite prepared by chemical reaction at different pH values

Effects of thermal anneal temperature on electrical properties and energy-storage density of Bi(Ni 1/2 Ti 1/2 )O 3 –PbTiO 3 thin films

Fe 3 O 4 /fepc/pc Magnetic Composites with High Mechanical Properties and Thermal Stabilities by in Situ Preparation