Abstract:Carbon nanotubes (CNTs) have attracted considerable attention due to their unique structure, remarkable properties, and their potential for a variety of applications, since their discovery by Iijima in 1991.The nanotube's high field enhancement, high aspect ratios, small tip radii of curvature and high current density make it a nearly ideal electron source for field emission. This paper discusses the production of CNTs produced by cathode self-heated CVD,so that the segment heated in growth is achieved and the temperature is controllable. Unlike the conventional method using silicon as substrates, molybdenum substrates are used. As the conductivity of silicon is not good, there are two techniques to deal with it: One is to use either p-doped or n-doped silicon as substrates. The other is to deposit metal contact layers on pristine silicon. However, using metal, like Mo, brings simplicity to the fabrication.Two kinds of catalysts are compared: sub-nanometer Fe and Al/ Fe bilayer catalyst films. In the same synthesis conditions, different catalysts are utilized to get different CNTs. Field emission characteristics of CNTs with Fe catalyst and CNTs with Al/Fe catalysts are discussed. Results show that emission properties of CNTs with Al/Fe catalysts are better. Also, results demonstrate that the emission current is determined not only by the morphology of CNTs, but also how the CNTs adhere to the electrode below. Good adhesion between CNTs and the substrate leads to easier transmission of electrons from electrodes to the bottom of CNTs. Aging process increased the field emission current of the CNT cathode.

Improvement of the Field Emission of Carbon Nanotubes-Metal Nanocomposite

Enhanced Field Emission from Carbon Nanotubes by Electroplating of Silver Nanoparticles

Study on field emission properties of CNTs electroless plating with Ag

Enhanced Field-Emission Performance from Carbon Nanotube Emitters on Nickel Foam Cathodes

Improvement of the field-emission characteristics of a cold cathode with nano particles

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Improving the Field Emission Characteristics of Tetrapod-Like Zinc Oxide Nanostructures by Coating with Silver Nanowires

Enhanced field emission and hysteresis characteristics of aligned carbon nanotubes with Ti decoration

Improvement of Carbon Nanotube Field Emission Properties by Ultrasonic Nanowelding

Constructing Ag nanoparticles-single wall carbon hybrid nanostructure to improve field emission properties

Field Emission from Carbon Nanotube/tin Composite

A Study of Silver Decoration on Carbon Nanotubes via Ultrasonic Chemical Synthesis and Their Reinforced Copper Matrix Composites

High Emission Current Density from Printed CNTs by Enhanced Emitters-Substrate Contact

Improved Emission Uniformity of Printed Carbon Nanotubes by Adding Graphene Conductive Network

Study of Film Thickness Effect on Carbon Nanotube Based Field Emission Devices

Large Current Emission from Carbon Nanotubes on Metal Substrates by Chemical-Vapor Deposition

Highly Enhanced Field Emission from CuO Nanowire Arrays by Coating of Carbon Nanotube Network Films

New Method to Fabricate Field-Emission Cathode of Carbon Nanotubes

Preparation and Electromagnetic Shielding Performance of Multi-metal Coated Carbon Nanotubes

Improvement of the field emission of carbon nanotubes by hafnium coating and annealing

Study on Chemical Nickel-plating for CNTs and Its Electro-magnetic Behavior