Abstract:Conducting polymers used in chemical sensors are attractive because of their ability to confer reversible properties controlled by the doping/de-doping process. Polyaniline (PANI) is one of the most prominent materials used due to its ease of synthesis, tailored properties, and higher stability. Here, PANI thin films deposited by the drop-casting method on fluorine-doped tin oxide (FTO) substrates were used in electrochemical and optical sensors for pH measurement. The response of the devices was correlated with the deposition parameters; namely, the volume of deposition solution dropped on the substrate and the concentration of the solution, which was determined by the weight ratio of polymer to solvent. The characterisation of the samples aimed to determine the structure–property relationship of the films and showed that the chemical properties, oxidation states, and protonation level are similar for all samples, as concluded from the cyclic voltammetry and UV–VIS spectroscopic analysis. The sensing performance of the PANI film is correlated with its relative physical properties, thickness, and surface roughness. The highest electrochemical sensitivity obtained was 127.3 ± 6.2 mV/pH, twice the Nernst limit—the highest pH sensitivity reported to our knowledge—from the thicker and rougher sample. The highest optical sensitivity, 0.45 ± 0.05 1/pH, was obtained from a less rough sample, which is desirable as it reduces light scattering and sample oxidation. The results presented demonstrate the importance of understanding the structure–property relationship of materials for optimised sensors and their potential applications where high-sensitivity pH measurement is required.

Wire-like Nano-Polyaniline Deposited Electrochemically in a Reverse Micelle Electrolyte As a Ph Sensor

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Preparation of ZnO/PANi Composite Nanowire and Their Interactions on Interface between ZnO and PANi

Optimized Drop-Casted Polyaniline Thin Films for High-Sensitivity Electrochemical and Optical pH Sensors

Electrodeposition of polyaniline nanowires and their electrochemical properties

Cyclic Voltammetry for the Determination of the Selectivity of PANI-HClO4 Sensor to Different Acids

Preparation of Porous Nanorod Polyaniline Film and Its High Electrochemical Capacitance Performance

Layer-by-layer Assembly of Polyaniline Nanofibers/poly(acrylic Acid) Multilayer Film and Electrochemical Sensing

Effect of pH on the properties of protonated polyaniline‐based films for pH sensing applications

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

Controlled synthesis of polyaniline inside mesoporous carbon for electroanalytical sensors

Fabrication of Polyaniline (PANI) Through Parallel Nanopores: Charge Transport Properties of PANI@SiO2 Nanopore Molecular Junctions

Protein Adsorption under Electrical Stimulation of Neural Probe Coated with Polyaniline.

Fabrications of Polyaniline Films by Pulse Electrodeposition in Acidic Solutions with Different Anions and Their Thermoelectric Performances

Polyaniline Nanowire Electrodes with High Capacitance Synthesized by a Simple Approach

Polyaniline films with nanostructure used as neural probe coating surfaces

Electrical Conductivity and Ph Sensitivity of Ordered Porous Gel Acrylate Polymer Membrane with Nano-PANI Doping

Fully Printed pH Sensor based on Polyaniline/Graphite Nanocomposites

Fabrication of PANI-modified PVDF nanofibrous yarn for pH sensor

Polyaniline nanoparticle-carbon nanotube hybrid network vapour sensors with switchable chemo-electrical polarity

Preparation and Electrochromism of Polyaniline Films by in-situ Polymerization