Abstract:In order to represent the mechanical response laws of high-modulus asphalt pavement (HMAP) faithfully and objectively, the viscoelasticity of high-modulus asphalt mixture (HMAM) was considered, and the viscoelastic mechanical responses were calculated systematically based on moving load by numerical simulations. The performances of the HMAP in resistance to the deformation and the cracking at the bottom layer were compared with the ordinary asphalt pavement. Firstly, Lubao and Honeywell 7686 (H7686) were selected as the high modulus modifiers. The laboratory investigations of Asphalt mix-70 penetration, Asphalt mix-SBS (styrene-butadiene-styrene), HMAM-Lubao and HMAM-H7686 were carried out by dynamic modulus tests and wheel tracking tests. The conventional performances related to the purpose of using the HMAM were indicated. The master curves of the storage moduli were obtained and the viscoelastic parameters were fitted based on viscoelastic theories. Secondly, 3D pavement models based on moving loads for the viscoelastic structures were built using the non-linear finite element software ABAQUS. The wheel path was discretized in time and space to apply the Haversine wave load, and then the mechanical responses of four kinds of asphalt pavement were calculated. Finally, the sensitivity analysis was carried out. The results showed that the addition of the high modulus modifiers can improve the resistance to high-temperature rutting of the pavements. Except for the tensile strain and stress at the bottom of the underlayer, other responses decreased with the increases of the dynamic moduli and the change laws of the tensile strain and stress were affected by the range of the dynamic modulus. The tensile stress at the bottom of the asphalt layer would be too large if the modulus of the layer were too large, and a larger tensile strain would result. Therefore, the range of the modulus must be restricted to avoid the cracking due to excessive tension when using the HMAM. The resistance of the HMAP to deformation was better and the HMAP was less sensitive to load changes and could better withstand the adverse effects inflicted by heavy loads.

A Numerical Implementation of the Three-Dimensional Viscoelastic Model for Asphalt Mastic

Nonlinear Viscoelasticity and Viscoplasticity Characteristics of Virgin and Modified Asphalt Binders

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Viscoelastic Mechanical Responses of HMAP under Moving Load.

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Comparative Study of 2D and 3D Micromechanical Discrete Element Modeling of Indirect Tensile Tests for Asphalt Mixtures

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

A New Short-Term Aging Model for Asphalt Binders Based on Rheological Activation Energy

Study on Relaxation Damage Properties of High Viscosity Asphalt Sand under Uniaxial Compression

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Cohesive Cracking Simulation of Asphalt Mixture with Reflective Crack Through Xfem

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Study of the Viscoelasticity for Fibrous High ViscoelasticAsphalt Sand

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

A Research on Fatigue Damage Constitutive Equation of Asphalt Mixture

Characterization of the nonlinear viscoelastic constitutive model of asphalt mixture

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Numerical Simulation of an Indirect Tensile Test for Asphalt Mixtures Using Discrete Element Method Software

Time-Temperature-Stress Equivalent Characteristics and Nonlinear Viscoelastic Model of Asphalt Mixture under Triaxial Compressive Stress State

Predicting asphalt mixture fatigue life via four-point bending tests based on viscoelastic continuum damage mechanics