Abstract:The pebble flow of a two-region-designed dynamic reactor core is simulated by discrete element method. The aims are to verify the feasibility of the two-region-designed reactor and explore the influence of loading ratio and pebble density on flow pattern. Results show that after a period of recirculation flow, the pebble bed can reach equilibrium states with invariable central boundary and stable discharging number ratio of pebbles in the middle to the side regions, which is consistent with the loading ratio of them. The mixing region at different heights and the dispersion of pebbles are analyzed. The mixing zone between the two regions is constrained within reasonable and acceptable ranges. The loading ratio has no influence on the retention rate. But it could significantly affect the two-region configuration, i.e. a larger loading ratio corresponds to a larger central region. Besides, both the shape of the central region and the stagnant zone could be affected by pebble density. Compared to the single-density condition, increasing the middle pebble density (the L-H-L condition) can accelerate the pebble flow and reduce the size of central region. Meanwhile the stagnant zone may be larger and the total retention time may be longer, which are not beneficial to the core safety. On the other hand, although the flow of middle pebbles may be much slower and the central area size may be larger by increasing the side pebble density (the H-L-H condition), all pebbles will flow out of the bed in shorter time, leading to smaller stagnant zone and shorter total retention time. Finally, the vertical flow can be greatly affected by pebble density distribution, and the axial velocity profiles show different patterns between the bottom and the upper part of the packed bed. (C) 2019 Elsevier Ltd. All rights reserved.

Effects of Particle Size and Region Width on the Mixing and Dispersion of Pebbles in Two-Region Pebble Bed

Effects of Density Difference and Loading Ratio on Pebble Flow in a Three-Dimensional Two-Region-designed Pebble Bed

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Numerical Study of Mixing Pebble Flow with Different Density in Circulating Packed Bed

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

DEM Study of the Size-Induced Segregation Dynamics of a Ternary-Size Granular Mixture in the Rolling-Regime Rotating Drum

DEM Study of the Porosity Distribution of Pellet Sandpile Formed by Ternary Size Particles

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Numerical Analysis of the Effects of Different Outlet Sizes on Pebble Flows in HTR-10 Pebble Beds

Numerical Study of Mixing of Binary-Sized Particles in Rotating Tumblers on the Effects of End-Walls and Size Ratios

Numerical Study of the Effects of Loading Method on Mixing of Two Kinds of Pebbles in HTGR: A GPU-DEM Simulation

Numerical Study on Discharging Characteristics of Pebble Cluster Flow in Pebble Bed

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Investigation of mixing homogeneity of binary particle systems in high-shear wet granulator by DEM

Effects of Aspect Ratio and Component Ratio on Binary-Mixed Discharging Pebble Flow in Hoppers

Experimental and numerical validation of a two-region-designed pebble bed reactor with dynamic core

Designing non-segregating granular mixtures

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Numerical Simulations of Particle Motion in a Two Dimensional Pebble Bed Modular Reactor

Segregation and mixing of binary mixtures of spherical particles in a bubbling fluidized bed

Numerical Study of the Effect of Particle Size on Pebble Flow in the HTR-PM